Turn signal lever
Operating instructions
1
Right turn
2
Lane change to the right (push
and hold the lever partway)
The right hand signals will flash
until you release the lever.
3
Lane change to the left (push
and hold the lever partway)
The left hand signals will flash until
you release the lever.
4
Left turn
■
Turn signals can be operated when
The engine switch is in the "ON" position.
■
If the indicator flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
4-2. Driving procedures
I n f o r ma t i o n P r o v i d e d b y :
189
4