Toyota tundra 2016 User Manual page 173

Positions for towing hitch receiver
1
Hitch receiver pin hole position:
46.4 in. (1179 mm)
Connecting trailer lights
Use the wire harness stored in the rear end of the vehicle.
 Vehicles without towing pack-
age
■
Service connector for towing brake controller (if equipped)
Your vehicle is equipped with a service
connector for the trailer brake controller
as shown.
Access the service connector.
1
Remove the scuff plate.
2
Remove the clip (screw type) and trim
board.
3
Remove the connector cover.
4-1. Before driving
 Vehicles with towing package
I n f o r ma t i o n P r o v i d e d b y :
173
4