Toyota tundra 2016 User Manual page 186

186
4-2. Driving procedures
Selecting shift ranges in the S position
To enter S mode, shift the shift lever to S. Shift ranges can be selected
by operating the shift lever, allowing you to drive in the shift range of
your choosing. The shift range can be selected by the shift lever.
Floor shift type

1
Upshifting
2
Downshifting
The selected shift range, from 1 to 6 (6-speed models) or 1 to 5 (5-
speed models), will be displayed in the meter.
The initial shift range in S mode is set automatically to 5 or 4 (6-speed
models) or 4 (5-speed models) according to vehicle speed. However,
the initial shift range may be set to 3 or 2 (6-speed models) or 3 (5-
speed models) if the AI-SHIFT (P. 188) has operated while the shift
lever was in the D position.
Column shift type

I n f o r ma t i o n P r o v i d e d b y :