Toyota tundra 2016 User Manual page 107

Removing the tailgate
■
Before removing the tailgate
These connector covers are used when removing the tailgate, to
prevent the back-up camera wire harness connectors from being
contaminated.
Connector cover (Gray)
Connector cover (White)
Store the connector covers in the
glove box in a plastic bag when not
using.
1
To disconnect the wire harness
connectors
depress small plastic tab on
1
connector
from connector
1
Tailgate wire harness con-
nector (White)
2
Frame wire harness connec-
tor (Gray)
2
Attach the connector cover
(White) to the frame wire har-
ness connector (Gray).
Connector cover (White)
2
Frame wire harness connec-
tor (Gray)
3-2. Opening, closing and locking the doors
1 2
( and
and pull apart
2
.
I n f o r ma t i o n P r o v i d e d b y :
),
107
3