Converting To Another Gas Type; Jet Table; Changing The Jets - Miele CS 1011 Operating And Installation Instructions

Converting to another gas type


Conversion from one type of gas
to another, should only be under-
taken by an approved and registered
gas installer in strict accordance with
current local and national safety and
building regulations.
Disconnect the hob from the electri-
city supply and turn off the gas sup-
ply.

Jet table

The jet markings refer to a ¹/₁₀₀ mm
bore diameter.
Main jet
Natural gas H
Liquid gas
54

Simmer ad-
justment jet
1.75 0.88/0.42
Nr. 34
1.12 0.60/0.23
Nr. 7

Changing the jets

 Disconnect the hob from the electri-
city supply and turn off the gas sup-
ply.
When converting to another type of
gas, both the main and small jets
need to be changed.
The upper part of the appliance has to
be removed before the jets can be
changed.
 Remove the burner caps , burner
ring  and burner head .
 Undo the screws .
 Pull the control knob off.