Pan Supports; Burner - Miele CS 1011 Operating And Installation Instructions

Pan supports

Do not clean the pan supports in a
dishwasher.
 Remove the pan supports.
 Clean the pan supports with a solu-
tion of warm water and a little wash-
ing-up liquid applied with a soft
sponge. Stubborn soiling should be
soaked first.
 After cleaning, dry the pan supports
thoroughly with a clean cloth.
Cleaning and care

Burner

Do not clean any parts of the burner
in a dishwasher.
 The burner should be dismantled and
then cleaned by hand using a solu-
tion of warm water and a little wash-
ing-up liquid applied with a soft
sponge.
 Parts of the burner that cannot be re-
moved should be wiped clean with a
damp cloth only.
 The ignitor and thermocouple should
be very carefully wiped clean using a
well wrung out cloth.
Do not let the ignitor get wet. If it gets
wet, it will not spark.
 After cleaning, dry all surfaces with a
clean cloth. Make sure that the flame
slits are clean and completely dry.
The surfaces of the burner caps will
become more matt with time. This is
quite normal and does not indicate
damage to the burner caps. Nor will
affect the operation of the hob.
31