Miele CS 1011 Operating And Installation Instructions page 46

Installation
Natural stone worktops
You will need heavy duty double-side
tape (not supplied) to secure the
spring clamps and spacer bars.
 Stick the tape  to the top edge of
the cut-out in the positions shown in
the diagram.
 Position the spring clamps  and
spacer bars  on or at the top edge
of the cut-out and press them firmly
into place.
46
 Apply silicone to the side and lower
edges of the spring clamps  and
the spacer bars .
 Then fill gap  between spacer
bar  and the worktop with silicone.