Record Search - Samsung SNK-D5081 User Manual

Area: Set the specific area(s) in the camera‟s field of view to monitor for motion. A single channel is
divided into 44ⅹ30 (PAL) or 44ⅹ30 (NTSC) configurable grids. The red grids indicate that the
motion detection in the selected area is enabled. Semitransparent boxes means motion detection in
that area is disabled. Once you set your motion alert preferences, right click the mouse button to
return and click Save to make the setting effective.
Record Channel: When object motion is detected, the record channel setting will be activated.
Alarm Type
When the NVR fails to receive video signals due to some problems (camera damage,
Video Loss
line dropout or damage, power failure), the alarm will appear.
When IP camera detects object moving, alarm will be activated. Sensitivity is subject to
Motion
the actual application environment test. Sensitivity is adjusted according to the
Detection
sensitivity of the moving object detected and parameters set in the setting.
Alarm will appear when HDD does not work due to damage, power failure, HDD
HDD Status
auto-overwrite off and insufficient space.

3.3. Record Search

3.3.1 Record Search
Go to "Main Menu"→"Record Search"→"Record Search" to enter into the interface
Functions & Descriptions
Channel: Select the channel you want to search.
Type: Select the type the playback record. There are three
options,
All，Normal and Motion
Start Time/End Time: Select the specific period of time.
The default setting is from 0:00 to 24:00.
Playback Channel: Click a date and select corresponding
channel in Playback Channel. The selected channels shall
not be more than 8.
Playback: Select the desired year and month and click
"Search". If there are any records, a yellow corner mark
which shows the recording at specific date will appear at the
down-right corner of the date sheet. Select the date
checkbox and select playback channel and click Playback to
enter into the interface.
Playback interface: You can use the Playback Control bar
to operate the Fast Forward (X2, X4, X8 and X16), Rewind
(X2, X4, X8 and X16), Slow play (1/2, 1/4, 1/8, 1/16), Play,
Pause/Frame. When playback ends, NVR will remain in the
playback interface.
30
.