Alarm - Samsung SNK-D5081 User Manual

3.2.4 Alarm

Go to "Main Menu"→"Parameter"→ "Alarm" → "Motion" to enter into the interface.
3.2.4.1 Motion

Channel: Enable or disable Motion function.

Enable: Enables the use of a switch.

Sensitivity: Support 1-8 level, 8 is the highest level.

Buzzer: When detecting object moving, an alarm is turned on (disable, 10 seconds, 20
seconds, 40 seconds and 60 seconds).

Show Message: Messages will be displayed on the screen when a moving object is
detected and alarms are enabled.

Send Email: When a moving object is detected, an email will be sent to the address
entered.

Full Screen: When a moving object is detected, a message will be displayed in full
screen.

Post Recording: The duration time of the alarm recording can be set as 30 seconds, 1
minute, 2 minutes and 5 minutes.
29