Samsung SNK-D5081 User Manual page 39

3.5.1.2 DST
Go to "Main Menu"→"System"→"General"→"DST" to enter into the interface.
Enter into the interface set DST, Time Offset, Start Time and End Time.
3.5.1.3 NTP
Go to "Main Menu"→"System"→"General"→"NTP" to enter into the interface.

NTP service: Enable/Disable NTP function.

Server Address: Select NTP server (time.windows.com, time.nist.gov, pool.ntp.org).

Time Zone: Corresponding time zones for various nations or regions.

Update Now: Enable NTP function and save parameters and click Update Time to
calibrate the system time.
 Note: When NTP function is set to "Enable", system will calibrate the system time at
every 00:07:50 and every start-up.
39