Samsung SNK-D5081 User Manual page 69

Secondly, click "Start" to start updating. The updating progress can be seen on the screen. After
firmware is upgarded, please restart the browser and enter IP address and HTTP port of the NVR to
log in remotely.
Notes: Before clicking on Start, be sure to exit from the menu.
2. Load Default
User may remotely restore default parameters of NVR, with same setting method as that of NVR.
3. Events
User may configure Event Type, Buzzer, Send Email, Show Message and other parameters.
Detailed setting should be consistent with NVR local setting.
69