Menu Setup
Event Record Duration
You can set the beginning and ending point of a recording on an event.
[MENU] ▼ <Record> ►▼ <Event Record Duration> [ENTER] ▲▼◄► [ENTER]
• Pre Event : The recording of an event will start at a pre-determined time prior to the actual occurrence of the event.
If it is set to 5 seconds, the recording begins from 5 seconds before the event.
• POST Event : The recording will continue for a pre-determined time after the actual end of an event.
If it is set to 5 seconds, the recording ends in 5 seconds after an event.
M
`
If the video resolution is larger than 4CIF, recording may not proceed as much as the pre-event recording time.
The greater the video data size is, the maximum pre-event recording time will be reduced in inverse proportion.
Record Setting
You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event.
[MENU] ▼ <Record> ►▼ <Record Setup> [ENTER] ▲▼◄► [ENTER]
• Full Frame : Save all the frames incoming from the camera.
• Key Frame : Save only major frames incoming from the camera.
Normally, one or two frame per second will be recorded, which differs depending on the camera settings.
• OFF : Do not make recording.
62_ Menu Setup