Connecting External Components - Onkyo HT-RC260 Instruction Manual

Onkyo av receiver instruction manual
Hide thumbs Also See for HT-RC260:
Table of Contents

Advertisement

Connecting External Components

The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to
the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver's display when changing settings.
Front
Connect your components to the appropriate jacks. The default input assignments are shown below.
✔: Assignment can be changed
No.
Jack
AUX INPUT
A
COMPONENT
B
VIDEO
DIGITAL IN
C
MONITOR OUT
D
BD/DVD IN
VCR/DVR IN
CBL/SAT IN
GAME IN
TV/CD IN
UNIVERSAL PORT
E
Note
• When you connect to both AUX INPUT AUDIO jacks and AUX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack
will be given a higher priority.
• The AV receiver can output audio and video signals from the AUX INPUT jacks to the VCR/DVR OUT jacks.
*1
Connect a turntable (MM) that has a phono preamp built-in. If your turntable (MM) doesn't have it, you'll need a commercially
available phono preamp.
If your turntable has a moving coil (MC) type cartridge, you'll need a commercially available MC head amp or MC transformer as
well as a phono preamp. See your turntable's manual for details.
• With connection
D
ten and record audio from the external components in the main room; you can listen to the audio in Zone 2 as well.
• With connection
C
• With connection
D
connect the main stereo.
How to record the video
• With the connections described above, you cannot record the video through the AV receiver. To make a connection for
En
video recording
(➔
16
A
(➔
35).
LINE IN
VIDEO
AUDIO L/R
IN 1 (BD/DVD)
IN 2 (CBL/SAT)
OUT
OPTICAL
IN 1 (GAME)
IN 2 (TV/CD)
COAXIAL
IN 1 (BD/DVD)
IN 2 (CBL/SAT)
, you can listen and record audio from the external components while you are in Zone 2. You can lis-
, you can enjoy Dolby Digital and DTS. (To record or listen in Zone 2 as well, use
, if your Blu-ray Disc/DVD player has both the main stereo and multichannel outputs, be sure to
27).
Rear
C
B
Signal
Components
Analog audio
Portable audio player
Composite video
Camcorder, etc
Analog audio
Component video Blu-ray Disc/DVD player
Satellite, cable, set-top box, etc.
TV, projector, etc.
Digital audio
Game console
TV, CD player
Blu-ray Disc/DVD player
Satellite, cable, set-top box, etc.
Composite video
TV, projector, etc.
Analog audio and
Blu-ray Disc/DVD player
composite video
VCR or DVD recorder/Digital
Video Recorder
Satellite, cable, set-top box, etc.
Game console
Analog audio
TV, CD player, Turntable
Cassette tape deck, MD, CD-R
Analog audio/
Universal port optional dock
Video
(UP-A1 etc.)
D
E
Assignable
*1
,
C
and
D
.)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents