Connecting External Components; Using The Aux Input Jack On The Front Panel - Onkyo 29400468 Instruction Manual

Connecting External Components

The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to
the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver's display when changing settings.
B A
No. Jack
COMPONENT IN 1 (BD/DVD)
A
VIDEO
IN 2 (CBL/SAT)
OUT
DIGITAL IN OPTICAL
B
COAXIAL (BD/DVD)
MONITOR OUT
C
BD/DVD IN
VCR/DVR IN
CBL/SAT IN
GAME IN
TV/CD IN
UNIVERSAL PORT
D
*1 Connect a turntable (MM) that has a phono preamp built-in. If your turntable (MM) doesn't have it, you'll need a commercially
available phono preamp.
If your turntable has a moving coil (MC) type cartridge, you'll need a commercially available MC head amp or MC transformer as
well as a phono preamp. See your turntable's manual for details.
• With connection B , you can enjoy Dolby Digital and DTS.
• If your Blu-ray Disc/DVD player has both the main stereo and multichannel outputs, be sure to connect the main stereo
output using connection C

Using the AUX INPUT jack on the front panel

C D
IN 1 (GAME)
IN 2 (TV/CD)
.
Connect your components to the appropriate jacks. The
default input assignments are shown below.
✔: Assignment can be changed
■
How to record the video
With the connections described here, you cannot record
the video through the AV receiver. To make a connection
for video recording (➔ 23).
Signal Components
Component Blu-ray Disc/DVD player
video
Satellite, cable, set-top box, etc.
TV, projector, etc.
Digital audio Game console
TV, CD player
Blu-ray Disc/DVD player
Composite TV, projector, etc.
video
Analog audio Blu-ray Disc/DVD player
and composite
VCR or DVD recorder/Digital
video
Video Recorder
Satellite, cable, set-top box, etc.
Game console
Analog audio TV, CD player, Turntable
sette tape deck, MD, CD-R
Analog audio/ Universal port optional dock
Video (UP-A1 etc.)
Portable audio player
Analog audio line
output (➔ 13)
(➔ 28).
Assignable
✔
✔
✔
✔
✔
*1 , Cas-
En
15