Technical Specifications; Note & Warning - Hegel H1 User Manual

TECHNICAL SPECIFICATIONS

H1 Integrated Amplifier
Power output
Minimum load
Input Sources
Input Terminals
Output Terminals
Line level Outputs
Frequency response
Phase response
Signal-to-noise ratio
Crosstalk
Distortion
Intermodulation
Damping factor
Remote Control
Dimensions
NOTE & WARNING
Hegel products should only be opened or serviced by certified technicians. The devices contain
electronic components that can cause severe electric shock. Work performed on Hegel products by
unqualified personnel can cause serious damage and personal injury.
Opening of the product by non-authorized personnel will void the guarantee.
The products must not be exposed to rain or moisture.
GUARANTEE
All Hegel products come with a 2-year guarantee against defective materials and workmanship.
In case you should need any assistance with your Hegel product please find your nearest dealer or
distributor by looking at the Hegel web site http:\\www.hegel.com
If you should have any problems locating your dealer or distributor please e-mail to info@hegel.com
www.hegel.com info@hegel.com
120W + 120W at 8 Ohms
Loudspeaker impedance down to 2 ohms can be used.
6 remote controllable inputs switched by gold plated relays
Gold plated Phono / RCA unbalanced and gold plated XLR balanced
One set of gold plated speaker terminals each channel
Gold plated Phono / RCA unbalanced tape out, Preout 1 and Preout 2
Less than +/- 0.1 dB deviation 20Hz-20kHz
Less than 2 degrees deviation 20Hz-20kHz
More than 100dB
Less than -100dB
Less than 0.004% @ 50W 8 Ohms 1kHz
Less than 0.01% (19kHz + 20kHz)
More than 1000 ( main power output stage )
Philips RC-5 compatible IR system 36kHz modulation
8cm x 43cm x 45cm (HxWxD), 15kg shipment weight.