Congratulations on your new Hegel H600. It also features a comprehensive list of All Hegel products are based on a simple streaming options with UPnP streaming, philosophy: Add as little as possible. We Spotify Connect, Airplay 2, Tidal Connect, work to keep the music signal as close to Chromecast built-in, and Roon Ready inte- the original as possible.
Index A word from Bent What’s in the box Quickstart General Use Connections Digital Inputs and Formats Network Setup Streaming Device Menu Remote Control General Information Safety Instructions Warranty and Disclaimers IMPORTANT: Before powering on the amplifier, make sure you have read and understood the safety instructions and warnings on page 18!
Quickstart 1. Connect your speakers For the best audio experience, the distance between the listener and each speaker should be the same. 230V~50/60Hz Fuse:6.3A T Inpu t Power : 850V A FUSE HOLDER...
Page 6
2. Connect a source Unbalanced Analog Balanced Analog BNC Digital Coaxial Digital USB Computer Network streaming Optical Digital...
Page 7
3. Connect the power cord 230V~50/60Hz Fuse:6.3A T Inpu t Power : 850V A FUSE HOLDER 4. Turn on the amplifier Power Switch...
Power Button the Auto In settings in the Device Menu. The H600 amplifier can be switched on and Update off with the power button located on the un- When put in standby mode, the device will derside of the amplifier, towards the front of automatically look for and install new updates.
• Home network connection (LAN - RJ45) AC Power Connection • AC Power connector with fuse holder: Left Channel Speakers 230V/115V/100V AC depending on • Left outputs country. Home Theater Most inputs on the H600 can be used as a Home Theater input, see Device Menu.
MQA (Master Quality Authenticated) All digital inputs except USB have input Hegel H600 includes MQA technology, sense. When the H600 detects a signal on which enables you to play back MQA audio one of these inputs it will turn on and switch files and streams, delivering the sound of to the active input.
Network settings Status Indicators The amplifier has its own Network Con- The Hegel device will display the network sta- figuration page where you can change the tus in the lower left corner of the display. amplifier’s network name and IP settings.
WARNING: When streaming to the Hegel device, always remember to check the player/device volume setting before pressing play. The Hegel device will change its volume to the volume set in the player.
Device Menu Navigation Info To enter the device menu, turn the Hegel Information about the Hardware Version of device on and press and hold the COMPUT- your product and the Firmware Version cur- ER PLAY button for 5 seconds. To navigate rently running.
Page 15
Enables you to use your TV remote to turn Here you can reset the product to the de- on your Hegel device and adjust its volume. fault factory settings. This will not affect any You can also configure automatic input firmware updates you have installed.
MUTE Mute on amplifiers VOL- Volume down General information This Hegel device can be controlled with the included Hegel RC8 Remote Control. The RC8 also controls other Hegel products, such as CD players and preamplifiers, and most connected media players.
Technical Specifications The most common way to connect a H600 Integrated Amplifier subwoofer is from the variable line output on your Hegel amplifier. If your subwoofer Power output 2*303W in 8 ohms Dual Mono is equipped with “high-level” speaker wire...
Placement and Cooling warm water or a mild detergent suitable for The Hegel amplifier should be placed on cleaning mirrors and windows. a flat, hard surface for proper cooling. The amplifier must never be placed on a carpet...
Need help?
Do you have a question about the H600 and is the answer not in the manual?
Questions and answers