Technical Specifications - Hegel H300 User Manual

TRANSPORT AND SHIPMENT
If you are packing the amplifier for shipping, please follow these instructions to avoid damaging the unit:
Be careful not to hold the volume- and source-knobs when lifting the amplifier.
Put the plastic bag around the amplifier. Make sure that the plastic bag does not press tightly on the knobs
as this may damage them during transportation.
Place the two bottom shock absorbers into the original cardboard box, one in each end of the box.
Place the amplifier into the cardboard box, fitting the shock absorbers. Place the top shock absorbers on
top of the amplifier.
Make sure the plastic bag is still loose around the volume and source knobs to avoid any damage to the
knobs during transport. Close the cardboard box using a suitable tape.
CLEANING
Fingerprints or stains on the front panel or top cover can be removed with a cloth moistened with warm
water or a mild detergent suitable for cleaning mirrors and windows.

TECHNICAL SPECIFICATIONS

H300 Integrated Amplifier
Power output
Minimum load
Analog Inputs
Digital Inputs
Line level Output
Digital Output
Other Connections
Frequency response 5Hz-180kHz
Signal-to-noise ratio More than 100dB
Crosstalk
Distortion
Intermodulation
Damping factor
Dimensions
250W + 250W in 8 Ohms, Dual mono
2 ohms
1*balanced (XLR), 3*unbalanced (RCA), 1*Home Theatre (RCA)
2*coaxial S/PDIF, 2*optical S/PDIF, 1*USB.
Unbalanced Pre Out (RCA)
Coaxial S/PDIF out (digital inputs only)
Direct IR in - 3,5mm jack, max 12V
Less than -100dB
Less than 0.01% @ 100W 8 Ohms 1kHz
Less than 0.01% (19kHz + 20kHz)
More than 1000 ( main power output stage )
12cm x 43cm x 38cm (HxWxD), 25kg shipment weight.