Index A word from Bent What’s in the box Quickstart General Use Connections Digital Inputs Remote Control Network Configuration Using AirPlay Using Spotify Software Update Special Functions General Information Additional Information...
Congratulations on your new Hegel H390. All Hegel products are based on a simple philosophy: Add as little as possible. We always aim to keep the music signal close to the original recording. We are constantly looking for ways to lower distortion and noise. By lowering noise, we unveil layers of music covered by noise.
For the best audio experience the distance between the listener and each speaker should be the same. Right Channel Left Channel Speaker Speaker Amplifier circuit protected by Hegel US Patent No 6.275.104 H390 Integrated Amplifier Hegel, Oslo, Norway A 46 Serial Number...
Page 7
Quickstart 2. Connect a source Unbalanced Analog Balanced Analog Coaxial Digital USB Computer Network streaming Optical Digital...
Page 8
Quickstart 3. Connect the power cord 4. Turn on the amplifier Power Switch...
The Hegel H390 will display the network Power Button status in the lower left corner. The H390 amplifier is switched on and off with the power button located on the under- Network status is OK: side of the amplifier, towards the front of the unit.
(M) Digital Out (DAC loop) Home Theater • BNC: Output BNC(D) Most inputs on H390 can be used as a Home Theater input, see speacial functions. Digital Input Always power the amplifier off before • BNC: Input BNC (E) connecting input/output audio cables • Coaxial: Input Coaxial/RCA (F)
DSD(DoP). files and streams, delivering the sound of the original master recording. The Hegel H390 has a plug and play USB “MQA” or “MQA.” indicates that the product DAC. Connect it to your PC or Mac and is decoding and playing an MQA stream or enjoy all your music.
NEXT Skip to next track on most computers/media players DAC+ Input source selector button for Hegel DACs This will put certain Hegel equipment in low power mode DISP Display on/off (hold for off) PREV Skip to previous track on Hegel CD-players...
Network Configuration Playing Files on a Network Device The Hegel H390 has its own Network Con- figuration page to where you can change The Hegel H390 can function as a Digital the name, the IP settings and update the Media Renderer. This means that firmware.
All AirPlay compatible devices will now check of the speakers that you want to listen detect the Hegel H390 in their list of AirPlay to. You can also adjust the volume on each speakers, it will be displayed as “H390”, individual speaker.
Listen out loud with Spotify Connect 1. Connect your Hegel H390 to your local network 2. Open up the Spotify app on your phone, tablet or laptop using the same local network 3. Play a song and select Devices Available.
Software Update Make sure your H390 is connected to a network with an internet connection. Menu navigation COMPUTER PREV - Up PREV PLAY NEXT PLAY - Select Hold Play on your remote control for around NEXT - Down 5 seconds to enter the device menu.
The DISP button on the RC8 remote control A user defined volume value may be used as may be used to turn the display of the H390 the power-up volume. The current volume is on or off. Hold the DISP button for more set as the power-up volume by pressing and than 1 second to turn the display off.
1*USB 1*Network Use and Placement Line level Output 1*Unbalanced fixed(RCA), The Hegel H390 should be placed on a flat, 1*Unbalanced variable(RCA) hard surface for proper cooling. The amplifier MQA supported inputs USB, BNC, Optical and performs best after being switched on for...
Hegel product please find your nearest badge and has been certified dealer or distributor by looking at the Hegel by the developer to meet Apple performance standards. web site www.hegel.com. If you experience any problems locating your dealer or dis- Apple, iPad and iPhone are trademarks of Apple Inc.,...
Need help?
Do you have a question about the H390 and is the answer not in the manual?
Questions and answers