Congratulations on your new Hegel H190v. With streaming solutions like Spotify Con- All Hegel products are based on a simple nect, AirPlay, and Roon Ready, there are philosophy: Add as little as possible. We very few limits to what and how you can work to keep the music signal as close to connect.
Index A word from Bent What’s in the box Quickstart General Use Connections Remote Control Network Setup Streaming Device Menu General Information Safety Instructions Warranty and Disclaimers IMPORTANT: Before powering on the amplifier, make sure you have read and understood the safety instructions and warnings on page 18!
Quickstart 1. Connect your speakers For the best audio experience, the distance between the listener and each speaker should be the same. xxAT FUSE HOLDER...
Page 6
2. Connect a source Unbalanced Analog Balanced Analog Phono (MM) Analog Coaxial Digital USB Computer Network streaming Optical Digital...
Page 7
3. Connect the power cord xxAT FUSE HOLDER 4. Turn on the amplifier Power Switch...
The source and volume can be changed Connect the 6.3mm headphone jack to using the input and volume selector on the the front of the H190v. This activates the front panel or using the remote control. headphone volume control and mutes the speaker outputs.
• XLR: Standard balanced analog input (Pin 1 is Chassis Ground; Pin 2 is Positive Phase; Home Theater Pin 3 is Negative Phase) Most inputs on the H190v can be used as a • Phono (RCA): Moving Magnet (MM) car- Home Theater input, see Device Menu.
MUTE Mute on amplifiers VOL- Volume down General information This Hegel device can be controlled with the included Hegel RC8 Remote Control. The RC8 also controls other Hegel products, such as CD players and preamplifiers, and most connected media players.
IP control NOTE: Some of the features of the Hegel The amplifier can be controlled by external device require an internet connection. smart home systems via IP control. For drivers and more information, please visit...
WARNING: When streaming to the Hegel device, always remember to check the player/device volume setting before pressing play. The Hegel device will change its volume to the volume set in the player.
Device Menu Navigation Info To enter the device menu, turn the Hegel Information about the Hardware Version of device on and press and hold the COMPUT- your product and the Software Version cur- ER PLAY button for 5 seconds. To navigate rently running.
Page 15
This will not affect any firmware updates you have installed. Exit Exit the menu NOTE: The Hegel device menu can be up- dated with new features and options. For an up-to-date and in-depth description of the menu and its features, please visit support.hegel.com...
H190v Integrated Amplifier The most common way to connect a subwoofer is from the variable line output Power output 2*150W in 8 ohms on your Hegel amplifier. If your subwoofer Minimum load 2 ohms is equipped with “high-level” speaker wire Analog inputs 1*Balanced (XLR) terminals, you can also use this.
Placement and Cooling Cleaning The Hegel amplifier should be placed on a flat, hard surface for proper cooling. The Unplug the amplifier from the AC outlet amplifier must never be placed on a carpet before cleaning.
Our dealers are carefully chosen for their expertise and should be Being Roon Ready means that Hegel uses Roon stream- able to help you with any Hegel-related ing technology, for an incredible user interface, simple issue. You can of course always reach us...
Need help?
Do you have a question about the H190v and is the answer not in the manual?
Questions and answers