Connecting Antenna - Onkyo TX-SR508 User Manual

Connecting Antenna

This section explains how to connect the supplied indoor FM antenna and AM loop antenna.
The AV receiver won't pick up any radio signals without any antenna connected, so you must connect the antenna to use
the tuner.
North American models
Insert the plug fully
into the jack.
Thumbtacks, etc.
Caution
• Be careful that you don't injure yourself when using thumbtacks.
Note
• Once your AV receiver is ready for use, you'll need to tune into a radio station and position the antenna to achieve the best possible
reception.
• Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords.
Tip
• If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.
• If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available outdoor AM
antenna.
En
18
European and Asian
models
Insert the plug fully
into the jack.
Indoor FM antenna (supplied)
Push. Insert wire.
Assembling the AM loop
antenna
AM loop antenna (supplied)
Release.