Resetting Remote Mode Buttons; Resetting The Remote Controller; Controlling Other Components - Onkyo TX-SR508 User Manual

If you want to control an Onkyo component by pointing the
remote controller directly at it, use the following remote
control codes:
32900:
Onkyo Blu-ray Disc player
32901:
Onkyo HD-DVD player
70868:
Onkyo MD recorder
71323:
Onkyo CD recorder
82990:
Onkyo Dock
Note
• If you connect an cassette tape deck to the TV/CD IN jack, or
connect an RI Dock to the TV/CD IN or VCR/DVR IN or
GAME IN jacks, for u to work properly, you must set the Input
Display accordingly

Resetting REMOTE MODE Buttons

You can reset a REMOTE MODE to its default remote
control code.
1
While holding down REMOTE MODE that you
want to reset, press and hold down AUDIO until
the remote indicator lights (about 3 seconds).
2
Within 30 seconds, press REMOTE MODE again.
The remote indicator flashes twice, indicating that
the button has been reset.
Each of REMOTE MODE is preprogrammed with a
remote control code. When a button is reset, its pre-
programmed code is restored.

Resetting the Remote Controller

You can reset the remote controller to its default settings.
1
While holding down RECEIVER, press and hold
down AUDIO until the remote indicator lights
(about 3 seconds).
2
Within 30 seconds, press RECEIVER again.
The remote indicator flashes twice, indicating that
the remote controller has been reset.
En
54
(➔ 22).

Controlling Other Components

By pressing REMOTE MODE that's been programmed
with the remote control code for your component, you can
control your component as below.
For details on entering a remote control code for a differ-
53).
ent component (➔
Controlling a TV
TV is preprogrammed with the remote control code for
controlling a TV that supports the p
must be able to receive remote control commands via
p and be connected to the AV receiver via HDMI.
If controlling your TV via p doesn't work very
well, program your TV's remote control code into TV and
use the TV remote mode to control your TV.
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player or DVD Recorder
BD/DVD is preprogrammed with the remote control code
for controlling an Onkyo Blu-ray Disc/DVD player.
BD/DVD is preprogrammed with the remote control code
for controlling a component that supports the p.
The component must be able to receive remote control
commands via p and be connected to the AV
receiver via HDMI.
*1 . The TV