Safety And Instructional Decals - Toro 38820 Operator's Manual

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
1. Left turn control
2. Traction drive—squeeze
the lever to engage; release
the lever to disengage.
Order part no. 112-6633
1. Fast
2. Forward speeds
3. Warning—read the
Operator's Manual.
4. Cutting/dismemberment
hazard, impeller—do
not place your hand
in the chute; stop the
engine before leaving the
operator's position, use the
tool to clear the chute.
106-4525
3. Slow
4. Reverse speeds
112-6627
5. Cutting/dismemberment
hazard, impeller—keep
away from moving parts;
remove the ignition key and
read the instructions before
servicing or performing
maintenance.
6. Thrown object
hazard—keep bystanders
a safe distance from the
snowthrower.
1. Cutting dismemberment, impeller and cutting
dismemberment, auger hazards—keep bystanders a safe
distance from the snowthrower.
Reorder part no. 112-6629
1. Cutting/dismemberment hazard, impeller—do not place
your hand in the chute; stop the engine before leaving the
operator's position, use the tool to clear the chute.
3
7. Auger/impeller
drive—squeeze the lever to
engage; release the lever
to disengage.
8. Right turn control
107-3040
112-6625