Table Of Contents; Safety; Sound Pressure; Sound Power - Toro 38820 Operator's Manual

This spark ignition system complies with Canadian ICES-002.
Contents
Introduction .................................................................. 1
Safety ........................................................................... 2
Sound Pressure ....................................................... 2
Sound Power .......................................................... 2
Vibration................................................................ 2
Safety and Instructional Decals ................................. 3
Setup ............................................................................ 5
1 Installing the Upper Handle.................................... 6
2 Installing the Wheel Clutch Cable Ends .................... 6
3 Installing the Traction Control Linkage .................... 7
4 Installing the Chute Control Rod ............................. 8
5 Connecting the Wire to the Headlight ...................... 9
6 Filling the Engine with Oil...................................... 9
7 Checking the Tire Pressure ....................................10
8 Checking the Skids and Scraper ..............................10
9 Checking the Traction Drive Operation ...................10
Product Overview .........................................................12
Operation ....................................................................12
Before Operation ......................................................12
Safety....................................................................12
Filling the Fuel Tank ...............................................12
During Operation .....................................................13
Safety....................................................................13
Starting the Engine .................................................14
Stopping the Engine ...............................................16
Operating the Traction Drive ...................................16
Using the Wheel Clutch Levers.................................16
Operating the Speed Selector ...................................17
Operating the Auger/Impeller Drive.........................17
Operating the Quick Stick®.....................................18
Unclogging the Discharge Chute ..............................18
Operating Tips ......................................................19
After Operation ........................................................19
Safety....................................................................19
Preventing Freeze-up ..............................................19
Maintenance .................................................................20
Recommended Maintenance Schedule(s) ......................20
Maintenance Safety.................................................20
Preparing for Maintenance.......................................20
Checking the Engine Oil Level .................................20
Checking and Adjusting the Skids .............................21
Checking and Adjusting the Traction Cable ................21
Checking the Auger Gearbox Oil Level ......................22
Changing the Engine Oil .........................................22
Replacing the Spark Plug .........................................23
Adjusting the Discharge Chute Latch ........................23
Replacing the Drive Belts.........................................24
Replacing the Headlight Bulb ...................................24
Storage ........................................................................25
Preparing the Machine for Storage ............................25
Removing the Machine from Storage.........................25
Troubleshooting ...........................................................26

Safety

This machine meets or exceeds the ISO 8437
specifications of the International Standards
Organization in effect at the time of production.
•
Shut the machine off before unclogging, servicing, or
fueling.
•
Read and understand the contents of the manual before
you start the engine. Make sure everyone using this
product knows how to use the product and understands
the warnings.
•
Do not put hands or feet near moving components on
the machine.
•
Do not operate machine without all guards and other
safety protective devices in place and working on the
machine.
•
Keep clear of any discharge opening. Keep bystanders a
safe distance from the machine.
•
Keep children out of the operating area and under the
watchful care of a responsible adult other than the
operator. Never allow children to operate the machine.

Sound Pressure

This machine has a sound pressure level at the operator's
ear of 88 dBA (model 38820) and 89 dBA (model 38824).
The sound pressure level was determined according to the
procedures outlined in EN ISO 11201.

Sound Power

This machine has a guaranteed sound power level of 103
dBA (model 38820) and 105 dBA (model 38824). The sound
power level was determined according to the procedures
outlined in EN ISO 3744.
CAUTION
Long-term exposure to noise while operating the
machine may cause some hearing loss.
Wear adequate hearing protection whenever you
operate the machine for an extended period of time.

Vibration

Measured vibration level for the left hand = 3.8 m/s
2
38820) and 4.7 m/s (model 38824).
Measured vibration level for the right hand = 4.8 m/s
38820) and 5.6 m/s 2 (model 38824).
The measured values were determined according to the
procedures outlined in EN ISO 20643.
2
2 (model
2
(model