Securing Your Baby Using The Harness - Phil & Teds Evolution BS01-B Instructions Manual

Securing your baby /13
3.4 Securing your baby using the
harness
The car seat can be used in five positions:
• Loosen the shoulder belts by pressing the
release button and pulling the shoulder belts
as far as you can. Note! Do not pull the belt
pads (3-J).
• Open the belt buckle (3-M), then fix the belts
with elastic straps on both sides (3-K).
• Put your child comfortably with his/her back
against the shell and make sure that there
are no toys or other hard objects in the shell
(3-L).
• Slide buckle tongue sections together and
insert them in the buckle with an audible
"click" (3-N).
• Pull the shoulder belts tight, pull the remaining
slack out of the belt system & pull the belts
tight by the adjuster belt (3-L).
• Caution! Do not twist or interchange the
shoulder straps.