Stepless Adjustment Device; Securing Your Baby Using The Harness - Phil & Teds columbus User Manual

3.5 Stepless adjustment device

• The recline angles of the car seat can be adjusted
by front knob. (3d)
• Rotate clockwise to add the recline angles, to
reduce in the opposite, as shown by the icon on
the knob. (3e)
3f
3h
3g
3i
3.6 Securing your baby using
the harness
• Loosen the harness straps by pressing the release
button and pulling the harness straps as far as you
can. Note! Do not pull the shoulder pads. (3a)
• Open the harness buckle(3f), then place the
harness straps to the sides of the car seat. (3g)
Put the baby into the car seat.
• The correct belt height of the shoulder pads
is attained when the strap disappears into the
shell slightly above the shoulder of the child.
Make sure that the harness straps fit properly
over the shoulders of the child. 3c)
• Slide buckle tongues together and insert them
in the buckle with an audible sound "click" . (3h)
• Pull the straps tight by the harness adjustment
strap, and make sure the tightness is
comfortable to your kid. (3i)
CAUTION: Do not twist or interchange the
harness straps.
Securing your baby
15