Adjusting The Harness - Phil & Teds alpha Series Manual For Future Reference

Instructions
3a
3b
3c

Adjusting the Harness

3a Adjust the shoulder straps height so they are
3a
level with, or just below child shoulders.
3b 3b To adjust the height of shoulder straps, you need to
take out the straps from the splitter plate located in
the rear of the seat.
3d 3d Pull both straps through the shell and seat cover.
3e 3e Thread the harness straps through the proper
harness slot. Make sure that both straps are even
3d
and not twisted. From the rear of the seat, secure
the harness strap onto the splitter plate (reverse the
3b). Pull to make sure the harness straps are firmly
secured onto the splitter plate. Remember, shoulder
straps should be level with, or just below the child's
shoulders (3a). For more guidence on which harness
3e
slot to use please see the next page.