Installation In The Vehicle - Phil & Teds Evolution BS01-B Instructions Manual

4.3 Installation of Group II for
children 15-25kg.
• Before the installation, please remove the
belt system of baby car seat (see section 5.1)
(including belt pads, shoulder belt, buckle &
crotch strap jacket (4-L).
• Put your kid into the baby car seat. Guide car
belt through hook (4-M) and then through the
hole in the corner of the bottom (4-L).
• Pull the car belt through the hole, and insert it
into the buckle (4-N).
• Tighten car belt.

Installation in the vehicle /18

Please make sure
that lap strap is
worn low down,
so that the pelvis
is firmly engaged.