Display - Onkyo TX-NR1007 Instruction Manual

Front & Rear Panels—Continued
w SETUP MIC jack (57)
Audyssey MultEQ
Speaker Setup microphone connects here.
x AUX INPUT (37)
This input can be used to connect a camcorder,
game console, and so on. There are jacks for com-
posite video, analog audio, and optical digital audio.

Display

a b c
h
For detailed information, see the pages in parentheses.
a Speaker/channel indicators
Indicate the speaker channels used by the current
listening mode.
The following abbreviations indicate which audio
channels are outputted for the current listening
mode.
LW: Front wide left
LH: Front high left
RH: Front high right
RW: Front wide right
FL: Front left
C: Center
FR: Front right
SL: Surround left
SW: Subwoofer (Low Frequency Effects)
SR: Surround right
SBL: Surround back left
SB: Surround back
SBR: Surround back right
b Z2 indicator (129)
Lights when Powered Zone 2 is being used.
c Z3 indicator (129)
Lights when Powered Zone 3 is being used.
10
®
XT Room Correction and
d
i
y Up [r] and Down [e] buttons (63, 130)
Used to adjust the tone (bass and treble) for the
main room and the volume, tone and balance for
Zone 2 or Zone 3.
z MUSIC OPTIMIZER button (113)
Turns the Music Optimizer on or off.
A POWER switch (43)
(European and Asian models)
This is the main power switch. When set to OFF,
the AV receiver is completely shutdown. It must be
set to ON to set the AV receiver to On or Standby.
j
d Listening mode and format indicators (76)
Show the selected listening mode and audio input
signal format.
Audyssey (56, 93):
Flashes during Audyssey MultEQ
rection and Speaker Setup. Lights when the "Equal-
izer Settings" is set to "Audyssey" or
Audyssey Dynamic Surround Expansion™ listen-
ing mode is selected.
Dynamic EQ (97):
Lights when "Dynamic EQ" is enabled.
Vol (97, 113):
Lights when "Dynamic Volume" is enabled.
e NETWORK indicator (116)
Lights when the Net input selector is selected.
e f g
k l m
®
XT Room Cor-