Onkyo HT-R960 Instruction Manual page 82

Advanced Setup—Continued
8
Use the Down [
select "Surr Back Ch," and use
the Left and Right [
tons to select 2ch or 1ch.
Note:
• If the Surround or Surr Back settings
in steps 7 and 8 are set to No, this set-
ting does not appear.
9 Press the [SETUP] button.
Setup closes.
Speaker Distance
These settings are set automatically by the Automatic
Speaker Setup function (see page 42).
With these settings, you can specify the distance from
each speaker to the listening position.
1 Measure and make a note of the
distance from each speaker to
the listening position.
2
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
3
Use the Up and Down [
buttons to select "2. Speaker
Setup," and then press [ENTER].
82
] button to
]/[
2ch: Select if two (left and right)
surround back speakers are
connected.
1ch: Select if one surround back
speaker is connected.
4
] but-
5
6
7
8
Note:
• These settings cannot be adjusted while a pair of head-
phones is connected, speaker set B is on, or the multi-
]/[ ]
channel DVD input is being used.
Use the Up and Down [
buttons to select "2. Speaker Dis-
tance," and then press [ENTER].
While "Unit" is displayed, use the
Left and Right [ ]/[
select "feet" or "meters."
feet: Distances can be set in feet.
Range: 1 to 30 feet in 1-foot
steps.
meters: Distances can be set in
meters. Range: 0.3 to 9
meters in 0.3-meter steps.
Use the Down [ ] button to
select "Left," and use the Left and
Right [ ]/[ ] buttons to specify
the distance for the front speak-
ers, then press the Down [
ton to select the next speaker.
Repeat step 6 for all speakers.
Note:
Speakers that you set to No in the
"Speaker Configuration" on page 81
cannot be selected.
Press the [SETUP] button.
Setup closes.
]/[ ]
] buttons to
] but-