Table of Contents
Advertisement
Recording
This section explains how to record the input source and
how to record audio and video from separate sources.
Notes:
• The surround sound and DSP listening modes cannot
be recorded.
• Copy-protected DVDs cannot be recorded.
• Sources connected to the multichannel DVD input
cannot be recorded.
• Sources connected to a digital input cannot be
recorded. Only analog inputs can be recorded.
• DTS signals will be recorded as noise, so don't
attempt analog recording of DTS CDs or LDs.
Recording the Input Source
Audio sources can be recorded to a recorder (e.g., cas-
sette deck, CDR, MD) connected to the TAPE OUT jack.
Video sources can be recorded to a video recorder (e.g.,
VCR, DVR) connected to the VCR/DVR OUT jacks.
See pages 25 to 40 for hookup information.
1
Use the input selector buttons to
select the source that you want
to record.
DVD
VCR/DVR CBL/SAT
See "Which Connections Should I
Use?" on page 26 to see which signals
AUX
TAPE
TUNER
can be output and recorded.
CD
You can watch the source while record-
ing it. The AV receiver's MASTER
Remote
controller
VOLUME control has no effect on
recording.
2
On your recorder, start record-
ing.
3
On the source component, start
playback.
Note:
• If you select a different input source during recording,
that input source will be recorded instead.
Recording from Different AV Sources
You can overdub audio onto your video recordings by
simultaneously recording audio and video from two sep-
arate sources. This is possible because only the audio
source is switched when an audio-only input source,
such as TAPE, TUNER, or CD, is selected, the video
source remains the same.
In the following example, audio from the CD player con-
nected to the CD IN and video from the camcorder con-
nected to the AUX INPUT VIDEO jack are recorded by
the VCR connected to the VCR/DVR OUT jacks.
AUX INPUT
VIDEO
L
AUDIO
R
video signal
audio signal
IN 2
IN 4
IN 3
(CBL/SAT)
DIGITAL IN
COMPONENT VIDEO
Y
1
(DVD)
COAXIAL
C
B/
P
B
2
(CBL/SAT)
C
P
R/
R
1
(VCR/DVR)
OPTICAL
OUT
IN 2(CBL/SAT)
IN 1(DVD)
ASSIGNABLE
2
(CD)
IN
OUT
IN
ASSIGNABLE
L
R
REMOTE
CONTROL
CD
TAPE
CD player
1
Prepare the camcorder and CD player for
playback.
2
Prepare the VCR for recording.
3
Press the [AUX] input selector button.
4
Press the [CD] input selector button.
This selects the CD player as the audio source but
leaves the camcorder as the video source.
5
Start recording on the VCR, then start
playback on the camcorder and CD player.
Video from the camcorder and audio from the CD
player are recorded by the VCR.
Camcorder
HDMI
ASSIGNABLE
OUT
(VCR/DVR)
IN 1
(DVD)
AM
MONITOR
CBL/SAT
VCR/DVR
DVD
OUT
V
V
ANTENNA
FM
75
S
S
IN
IN
IN
OUT
IN
OUT
IN
FRONT
SURR
CENTER
SURR BACK
L
L
R
R
SUB
WOOFER
DVD
CBL/SAT
VCR/DVR
VCR
75
Hide quick links:
Advertisement
Table of Contents
