Onkyo 29400021 Instruction Manual page 20

Connecting the AV receiver—Continued
Connecting the Speaker Cables
1
Strip 1/2" to 5/8" (12 to
15 mm) of insulation
from the ends of the
speaker cables, and
twist the bare wires
tightly, as shown.
2
Unscrew the terminal.
The following illustration shows which speaker should be connected to each pair of terminals. If you're using only one
surround back speaker, connect it to the SURR BACK/ZONE 2 L terminals.
Front high
right
speaker
Surround
right
speaker
20
1/2" to 5/8"
(12 to 15 mm)
Front wide
right Front right
speaker speaker
Surround
back right
speaker
3
Fully insert the bare
wires.
4
Screw the terminal tight.
Front left Front wide left
speaker speaker
Surround
back left
speaker
Front high
left Center
speaker speaker
Surround
left
speaker