Onkyo TX-8470 Instruction Manual
  1. Manuals
  2. Brands
  3. Onkyo Manuals
  4. Receiver
  5. TX-8470
  6. Instruction manual

Onkyo TX-8470 Instruction Manual

Network stereo receiver / network stereo amplifier
Hide thumbs Also See for TX-8470:
Table of Contents

Advertisement

Quick Links

Instruction Manual
NETWORK STEREO RECEIVER /
NETWORK STEREO AMPLIFIER
"6.
Firmware
Update"
TX-8470
En

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TX-8470 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Onkyo TX-8470

Summary of Contents for Onkyo TX-8470

  • Page 1 Instruction Manual NETWORK STEREO RECEIVER / NETWORK STEREO AMPLIFIER "6. Firmware Update" TX-8470...
  • Page 2 OPTICAL Supplementary Information Initial Setup Initial Setup Reducing the Power Consumption in Standby TX-8470(192.168.XXX.XXX) State TX-8470 When the following functions are enabled, the power consumption in standby state increases. To reduce the power consumption in standby state, check each setting and set the functions to "Off".

  • Page 3: Table Of Contents

    Before starting the procedure Connecting a Blu-ray/DVD Disc player and Game console Firmware Update Update Information of the firmware Connecting an Audio Component Connecting an Integrated Amplifier in a Checking the Firmware Version of the Unit separate room (Multi-zone) Firmware Update Procedure Connecting Antennas (North American Part Names and European models)
  • Page 4 Operating this unit Playing Back Amazon Music USB Storage Device Requirements Registering This Unit with Amazon Music Music Server Playing Amazon Music using the Onkyo Controller Music Server notes Playing Amazon Music using the remote controller ® Windows Media Player 12 settings...
  • Page 5 Appendix Play Queue Adding Play Queue Information General Specifications Sort and Delete Playing Back Setup Setup Menu Menu list 1. Audio 2. Control 3. Network 4. Bluetooth 5. Works with SONOS 6. Firmware Update 7. Lock 8. Factory Reset Web Setup Menu operations Troubleshooting Before starting the procedure...

  • Page 6: Before Starting The Procedure

    Before starting the procedure „ What's in the box • Safety Information (1) * This is an online user manual. This is not supplied with the product. „ Note • Connect speakers with an impedance of 4 Ω to 16 Ω. •...

  • Page 7: Firmware Update

    Firmware Update Disclaimer: The program and accompanying online documentation are Firmware Update Procedure furnished to you for use at your own risk. Our company will not be liable and you will have no remedy for damages for Updating can take about 20 minutes. Furthermore, existing settings are any claim of any kind whatsoever concerning your use of the program or the maintained regardless of the method used for update.
  • Page 8 Updating via USB 4. Press ON/STANDBY on the main unit to turn the unit into standby mode. The process is completed, and your firmware is updated to the latest version. • While updating the firmware, do not do the following: •...
  • Page 9 firmware file. 4. Connect the USB storage device to the USB port of this unit. • If an AC adapter is supplied with the USB storage device, connect the AC • Others: adapter, and use it with a household outlet. After removing the power plug once, insert it to the outlet, and then start the •...

  • Page 10: Part Names

    Part Names Front Panel E DIMMER button (North American, Middle East, Australian and Asian models): Switches the brightness of the display with three levels. It cannot be turned off completely. RT/PTY button (European models): Used when receiving stations transmitting text information. F SPEAKER A/B buttons: Select the terminals to VOLUME output audio from between SPEAKERS A/B.
  • Page 11 Front Panel N Remote control sensor: Receives signals from the remote controller. • The reception range of the remote controller is within a distance of approx. 16´/5 m, and an angle of 20° in vertical direction and 30° to right and left. O Display ( →p12) P MENU button: Used to display the menu.

  • Page 12: Display

    Display A: When audio is being output from the SPEAKERS A terminals B: When audio is being output from the SPEAKERS B terminals AB: When audio is being output from both the SPEAKERS A and SPEAKERS B terminals F Displays various information of the input signals. G Cursors ( / ): These may light when performing operations while "NET"...

  • Page 13: Rear Panel

    Rear Panel C ETHERNET port: Connect to the network with an Ethernet cable. D USB port: Connect a USB storage device to play music files ( →p66). You can also supply power (5 V/1 A) to USB devices with a USB cable.
  • Page 14 Rear Panel N TUNER AM/FM terminal (North American models): Connect the supplied antennas. TUNER OOFER L M N 75 Ω TUNER DAB/FM terminal (European models): Connect the supplied antennas. AUDI O I N AC INLET HDMI OUT HDMI IN ETHERNET HDCP 2.3 TUNER P HO NO...

  • Page 15: Remote Controller

    Remote Controller L REMOTE MODE MAIN/ZONE 2 buttons: ON/STANDBY button Controls the multi-zone function ( →p61). B INPUT SELECTOR buttons: Switches the input M RANDOM button: Used for random play to be played. C Play buttons: Used for playback operations operations when playing Music Server or USB.

  • Page 16: Inputting Characters

    Inputting Characters You can use the keyboard displayed on the TV to enter the password in Wi-Fi • Select "A/a" to switch between upper and lower cases. Setup ( →p81). • To enter a space, select " ". 1. Select a character or symbol with the cursors UP/DOWN/LEFT/ •...
  • Page 17 Connections (Before starting the procedure) Speakers you can use with this unit and cable connections 4-16 Connections Speaker layout Connecting speakers Connecting the Subwoofer Connecting a Power Amplifier Notes regarding connections with HDMI cables Connecting the TV Connecting Playback Devices Connecting an Integrated Amplifier in a separate room (Multi-zone) Connecting Antennas (North American and...

  • Page 18: Speakers You Can Use With This Unit And Cable Connections

    Connections Speakers you can use with this unit and cable connections „ Speakers you can use with this unit This unit supports speakers with 4 Ω to 16 Ω impedance. For speaker impedance, check the speaker instruction manual. „ (Note) Speaker Impedance If any of the connected speakers have 4 Ω...

  • Page 19: Speaker Layout

    Connections Speaker layout A SPEAKER A Speakers to be connected to the SPEAKERS A terminals. Install in the main Main Room room (where this unit is located). B SPEAKER B You can connect another speaker system to this unit. Connect these speakers to the SPEAKERS B terminals.

  • Page 20: Connecting Speakers

    Connections Connecting speakers Connect the speakers to the unit with speaker cable. • You can connect two sets of speakers to this unit. You can select which set to AC INLET listen to when enjoying music. You can also choose to listen to sounds from HDMI IN ETHERNET HDCP 2.3...

  • Page 21: Connecting The Subwoofer

    Connections Connecting the Subwoofer Connect a powered subwoofer with this unit using a subwoofer cable. A U D IO I N HDMI OUT HDMI IN ETHERNET HDCP 2.3 P H O NO BD/DVD CBL/SAT GAME A R C 5V/1A DIFITAL IN AUDIO IN PRE/LINE OUT PRE OUT...

  • Page 22: Connecting A Power Amplifier

    Connections Connecting a Power Amplifier You can connect a power amplifier to the unit and use the unit as a pre-amplifier. PRE/LINE OUT PRE OUT TUNER SPEAKERS This enables you to playback at high volumes that the unit by itself cannot produce.

  • Page 23: Notes Regarding Connections With Hdmi Cables

    Connections Notes regarding connections with HDMI cables HDMI (High-Definition Multimedia Interface) is a digital interface standard for „ (Note) Placement of cables connecting TVs, projectors, Blu-ray Disc players, game consoles, and other Putting a load on HDMI cables can lead to poor operational performance. Place video components.

  • Page 24: Connecting The Tv

    Connections Connecting the TV By connecting a TV to this unit, you can show the video from AV devices connected to this unit on the TV and also play the sound from the TV through this unit. To ARC TV AU DI O I N If the TV supports the ARC (Audio Return Channel) function(*), use only the HDMI OUT...
  • Page 25 Connections • Use an HDMI cable that supports 4K or 8K high-quality video when these are to be played. • Be sure to insert the HDMI cable all the way in.

  • Page 26: Connecting Playback Devices

    Connections Connecting Playback Devices Connecting a Blu-ray/DVD Disc player and Game console This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer A UDI O I N Electronics Control) standard, you can use the HDMI CEC function (*) that HDMI OUT HDMI IN...

  • Page 27: Connecting An Audio Component

    Connections Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using an analog audio cable. You can also connect a turntable that has an MM- A U D I O I N type or MC type cartridge to the PHONO jack.

  • Page 28: Connecting An Integrated Amplifier In A Separate Room (Multi-Zone)

    Connections Connecting an Integrated Amplifier in a separate room (Multi-zone) You can enjoy 2 ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). Use an analog audio cable to connect the ZONE 2 PRE/LINE OUT jacks on this unit to the input jack HDMI OUT HDMI IN ETHERNET...

  • Page 29: Connecting Antennas (North American And European Models)

    Connections Connecting Antennas (North American and European models) „ European models Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. PRE/LINE OUT PRE OUT TUNER SPEAKERS „ North American models DAB / ZONE 2 MAIN...

  • Page 30: Network Connection

    Connections Network Connection This unit can be connected to the network using a wired LAN or Wi-Fi (wireless LAN). You can enjoy network functions such as Internet radio by network AC INLET connection. If connection is made by the wired LAN, connect the router and ETHERNET HDCP 2.3 the ETHERNET jack with the Ethernet cable as shown in the illustration.

  • Page 31: Connecting The Power Cord

    Connections Connecting the Power Cord Connect the power cord after all the connections are completed. • This model includes a removable power cord. Be sure to connect the power cord to the AC INLET of the unit first, and then connect it to the outlet. Always AC INLET disconnect the outlet side first when disconnecting the power cord.
  • Page 32 Initial Setup Before starting the procedure 1. Install the app 2. Connect the unit to Wi-Fi Set the impedance Initial Setup...

  • Page 33: Before Starting The Procedure

    Download • To perform Initial Setup later, press SETUP or RETURN. Onkyo Controller (available on iOS and Android™ handsets) is a dedicated app • If a Wi-Fi connection is not established, or if a wired LAN connection is not available for free which allows you to use your handset as a remote controller.

  • Page 34: Connect The Unit To Wi-Fi

    If any of the connected speakers have 4 Ω or more to less than 6 Ω impedance, 1. Turn on the power of the unit. 2. Start Onkyo Controller. The search for this unit starts automatically when you and it is anticipated that they will be used continuously at full power, you have to start the app.
  • Page 35 Playback Basic Operations Basic Operations ® Bluetooth Playback Listening To the Radio Network Services Spotify AirPlay ® Amazon Alexa Playback Amazon Music TIDAL Connecting the Sonos System for Playback Internet Radio Convenience functions Multi-zone Playing different audio and video Using MY INPUT Playing music files saved on a USB storage device Music Server Play Queue...

  • Page 36: Basic Operations

    ON/STANDBY on the main unit. You can also select a source to play with the following operations: – Using the Onkyo Controller app ( →p33) – Turning the INPUT dial on the main unit. – Using the linking function (HDMI CEC) ( →p38)

  • Page 37: Adjusting The Volume

    You can also adjust the volume with the following operations: – Using the VOLUME dial on the main unit – Using the Onkyo Controller app ( →p33) – Using the linking function (HDMI CEC) ( →p38) *1 It cannot be set if the listening mode is Pure Audio or Direct.

  • Page 38: Switching Speakers

    Playback Switching speakers Using the linking function (HDMI CEC) When you have connected two sets of speakers to this unit, you can select By using an HDMI cable and connecting to a TV that is compatible with the which set to output the sound. HDMI CEC (Consumer Electronics Control) function, you are able to perform operations such as adjusting the volume of this unit with the TV's remote 1.

  • Page 39: Switching The Display

    Playback Switching the display Repeatedly pressing the DISPLAY button on the remote controller switches the display of the main unit in the following order. • The content displayed depends on the source, Bluetooth, etc., being played. • Not all the information is necessarily displayed. Input source and volume BD/DVD 4 0 .

  • Page 40: Bluetooth Playback

    If a password is requested, enter "0000". • This unit is displayed as "Onkyo TX-8470 XXXXXX". This display can be changed using the Friendly Name function ( →p82) or Onkyo Controller ( →p33) (available on iOS or Android™).
  • Page 41 Playback Playing Back 1. Perform the connection procedure on the Bluetooth enabled device. 2. Playing the music file. The input on this unit automatically switches to "BLUETOOTH". Turn up the volume of the Bluetooth enabled device to an appropriate level. •...

  • Page 42: Transmitting Audio From This Unit To Bluetooth Wireless Technology Enabled Devices

    Playback Transmitting audio from this unit to Bluetooth wireless technology enabled devices Pairing 1. Press the input selector you want to play. • Select a source other than "BLUETOOTH". This function does not work if you select "BLUETOOTH". 2. Press the SETUP button on the remote controller, select "4. Bluetooth" - "Bluetooth Transmitter", and select either "On (Tx)"...
  • Page 43 Playback Playing Back 1. Do the play operations on the AV component connected to this unit. Do the play operations on this unit when the input is TUNER or NET. • If "Variable" has been selected for the "Output Level", the volume can be adjusted on this unit.

  • Page 44: Listening To The Radio

    Playback Listening To the Radio „ Tuning Manually Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. 1. Press the TUNER button on the remote controller repeatedly to select either "AM"...
  • Page 45 Playback „ Frequency step setting (North American models) Press the SETUP button, and using the cursors and ENTER, select "1. Audio" - "AM/FM Frequency Step", and then select the frequency step for your area. Note that when this setting is changed, all radio presets are deleted. ‰...

  • Page 46: Using Rds

    Playback Using RDS ENTER button, the unit starts to search for another station. • If no stations are found, the message "Not Found" is displayed. (European models only) • Unusual characters may be displayed when the unit receives unsupported characters. This is not a malfunction. Also, if the signal from a station is weak, RDS stands for Radio Data System, and is a method of transmitting data in FM information may not be displayed.

  • Page 47: Listening To Dab Digital Radio (European Models Only)

    Playback „ Changing how stations are sorted Listening To DAB Digital Radio You can sort the available stations alphabetically or by multiplex. (European models only) 1. Press the TUNING MODE button on the main unit repeatedly to set the method for sorting the display order from the following. Perform the following procedure when this unit is on.

  • Page 48: Presetting A Radio Station

    When the station is registered, the preset number stops flashing. Repeat this procedure for all of your favorite radio stations. You can also register radio stations with the following operations: – Pressing MEMORY on the main unit. – Using the Onkyo Controller app ( →p33)

  • Page 49: Spotify

    Playback Spotify Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. The Spotify software is subject to third party licenses found here: https://www.spotify.com/connect/third-party-licenses...

  • Page 50: Airplay

    Confirm that this unit and the PC are connected to the same network beforehand. Then, press NET on the remote controller. Next, click the AirPlay icon in iTunes, select this unit from the displayed devices, and start play of a music file. iPhone Onkyo TX-8470 e.g., iOS 10...

  • Page 51: Playing Back On Multiple Devices (Airplay2)

    • Due to the characteristics of AirPlay wireless technology, the sound produced iPhone on this unit may slightly be behind the sound played on the AirPlay-enabled Onkyo TX-8470 device. Onkyo XXXXXXXX You can also play the music files on a PC with iTunes (Ver. 12.8 or later) Onkyo XXXXXXXX equipped.

  • Page 52: Amazon Alexa

    1. Register with the Amazon account on Onkyo Controller. This cannot be set • You need an Amazon account to use Amazon Alexa. For more information, with operations on this unit.

  • Page 53: Operating This Unit

    (*1) Log in using the same account as other terminals with Amazon Alexa. music, and skip music up or down. 8. When registration is finished, the screen returns to the one for Onkyo 1. With the unit on, speak at the terminal with Amazon Alexa (an Amazon Echo, Controller.

  • Page 54: Amazon Music

    Playback Amazon Music Registering This Unit with Amazon Music 1. Register with the Amazon account on Onkyo Controller. This cannot be set with operations on this unit. Refer to "1. Install the app" ( →p33) for information about the app.

  • Page 55: Playing Amazon Music Using The Onkyo Controller

    Playing Amazon Music using the Onkyo Controller 1. Start up Onkyo Controller. This unit is automatically displayed after startup. Then, tap and select this unit displayed. 2. Tap "NET" or "NETWORK" on the upper part of the screen to switch to the network screen.

  • Page 56: Tidal

    Registering this unit with TIDAL allows you to enjoy the music distribution service provided by TIDAL. You can register this unit on the screen of Onkyo Controller by downloading Onkyo Controller (available on iOS or Android™) to mobile devices such as a smartphone and tablet.

  • Page 57: Connecting The Sonos System For Playback

    Playback Connecting the Sonos System for Playback How to Connect This Unit and Sonos Port 1. Connect the Sonos Port to the AUDIO IN jack of this unit with the RCA audio cable supplied with the Sonos Port. Any input jacks other than the PHONO jack can be used.

  • Page 58: Playing Sonos On This Unit

    Playback Output Zone: With the cursors LEFT/RIGHT, select the ZONE where you want to listen to the music. "Main": Outputs audio only to the main room (where this unit is located). "Zone 2": Outputs audio only to the separate room (ZONE 2). "Main/Zone 2": Outputs audio to both the main room and separate room (ZONE 2).

  • Page 59: Internet Radio

    Playback Internet Radio By connecting this unit to an Internet-connected network, you can enjoy Internet radio services such as TuneIn Radio. • To play Internet radio services, the network needs to be connected to the Internet. • Depending on the Internet radio service, a user registration may be required on your PC beforehand. For details of each service, visit the website of each service. Playing Back Perform the following procedure when this unit is on.
  • Page 60 Playback Internet Radio Service Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing ENTER will display the menu on the screen.

  • Page 61: Multi-Zone

    Playback Multi-zone Using Onkyo Controller ( →p33) is convenient for operations of multi-zone You can enjoy 2 ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). The same source can be playback.

  • Page 62: Playing Back (Zone 2)

    Playback Turning ZONE 2 On/Off Playing Back (ZONE 2) 1. Press REMOTE MODE ZONE 2 once on the remote controller. • The remote controller switches to the mode for controlling ZONE 2. Note 2. Press ON/STANDBY on the remote controller. "Z2" lights in the main unit display when ZONE 2 turns on.
  • Page 63 Playback Selecting a source to play in ZONE 2 Adjusting the volume in ZONE 2 When using an integrated amplifier that has a volume control 1. Press REMOTE MODE ZONE 2 once on the remote controller. Use the volume control on the integrated amplifier to adjust the volume. •...

  • Page 64: Playing Different Audio And Video

    Playback Playing different audio and video Displaying Your Favorite Video on TV While Playing Music While listening to the music from a CD or Bluetooth enabled device, you can display video on TV from an AV component such as a Blu-ray Disc player. •...

  • Page 65: Using My Input

    Playback Using MY INPUT Registering SETUP ENTER RETURN With the unit in the state you want to register, perform the following procedure: 1. Press and hold one of the MY INPUT buttons 1 to 4. 2. “Preset Written” appears on the display and the settings are registered. BALANCE Content is overwritten if there was any already registered.

  • Page 66: Playing Music Files Saved On A Usb Storage Device

    6. Select the music file with the cursors, and then press ENTER to start playback. Onkyo Controller ( →p33) is convenient for controlling the playback of music • To return to the previous screen, press RETURN. stored on a USB storage device. It can be used on a smartphone or tablet to •...

  • Page 67: Usb Storage Device Requirements

    Playback • To display an album title, artist name and album art of a file in WAV format, USB Storage Device Requirements make the folder structure and file names as shown below when saving music files. The album art can be displayed by saving a .jpg file to display on the •...

  • Page 68: Music Server

    • Depending on the type of media server, the unit may not recognize it, or may not be able to play its music files. • Onkyo Controller ( →p33) is convenient for controlling the playback of music stored on a PC or NAS. It can be used on a smartphone or tablet to which you have downloaded Onkyo Controller (for use on iOS and Android™).

  • Page 69: Playing Back

    Playback Playing Back 6. Select the target server with the cursors, and press ENTER to display the items list screen. • This unit cannot access pictures and videos stored on servers. Perform the following procedure when this unit is on. •...
  • Page 70 Playback Controlling Remote Playback from a PC You can use this unit to play music files stored on your PC by operating the PC ® in your home network. The unit supports remote playback via Windows Media ® Player 12. To use the remote playback function of this unit with Windows Media Player 12, it must be configured beforehand.

  • Page 71: Play Queue

    2. Tapping the "+" icon of the track you want to add will open the pop-up to add the Play Queue information. When downloading Onkyo Controller (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can save your favorite playlist...

  • Page 72: Playing Back

    Playback 2. To reorder the tracks, tap the " " editing icon, then tap the “ ” icon of the 4. Tap the " " icon next to the track you want to delete to put in a " ", then track and drag it to the destination.

  • Page 73: Setup

    Setup Setup Menu Menu list 1. Audio 2. Control 3. Network 4. Bluetooth 5. Works with SONOS Setup 6. Firmware Update 7. Lock 8. Factory Reset Web Setup...

  • Page 74: Setup Menu

    Setup Setup Menu Press the SETUP button on the remote controller to display the Setup menu. UP/DOWN of the remote controller, and press the ENTER button to confirm your selection. Select the item with the cursors Use the cursors LEFT/RIGHT to change the default values. •...
  • Page 75 Setup TV screen (OSD) Main unit display 2. Control [ 2.Control [ Lang : English ] OSD Language [ HDMI CEC : On ] HDMI CEC [ Thru:Auto(Eco) ] HDMI Standby Through [ Auto Stby :Off ] Auto Standby [ ASb(Thru) :Off ] Auto Standby in HDMI Standby Through [ ARC: On ]...
  • Page 76 Setup TV screen (OSD) Main unit display 4. Bluetooth [ 4.Bluetooth [ Rx : On ] Bluetooth Receiver [ AutoChange: On ] Auto Input Change [ Reconnect : On ] Auto Reconnect [ Pairing Info Pairing Information [ Device: Device [ Stat: Status [ Tx...
  • Page 77 Setup TV screen (OSD) Main unit display 6. Firmware Update [ 6.F/W Update [ Notice: Enable ] Update Notice [ Ver:xxxx-xxxx- ] Version [ Update via NET ] Update via NET [ Update via USB ] Update via USB 7. Lock [ 7.Lock [ Setup:Unlocked ] Setup Parameter...

  • Page 78: Audio

    Setup Setup 1. Audio 1. Audio ‰ Speaker Impedance (Default Value: 6 ohms or above) ‰ AM/FM Frequency Step (North American models) (Default Value: Set the impedance (Ω) of the connected speakers. 10 kHz / 0.2 MHz) • For impedance, check the indications on the back of the speakers or their Select a frequency step to suit your residential area.

  • Page 79: Control

    Setup Setup 2. Control 2. Control ‰ OSD Language (Default Value: English/Japanese) ‰ HDMI Standby Through (Default Value: Auto (Eco)) When this is set to anything other than "Off", you can play the video and audio of Select the on-screen display language from the following. an HDMI-connected player on the TV even if the unit is in standby mode.
  • Page 80 • Default values vary depending on the regions. application such as Onkyo Controller that can control this unit. The unit will automatically enter standby mode ("AUTO STBY"...

  • Page 81: Network

    Setup Setup 3. Network 3. Network ‰ DHCP (Default Value: Enable) Change the settings of the Network function. • When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting automatically. ("Enable" is set by default) To assign fixed IP Auto configuration by DHCP Enable addresses to each components, you must set "DHCP"...
  • Page 82 3. Network ‰ Friendly Name (Default Value: Onkyo TX-8470 XXXXXX) ‰ AirPlay Device Name (Default Value: Onkyo TX-8470 XXXXXX) Change the model name of this unit which is displayed on the device Change the model name of this unit which is displayed on the AirPlay- connected to the network to an easily recognized name.
  • Page 83 Setup Setup 3. Network ‰ AirPlay Password (Default Value: -) ‰ Privacy Statement (Default Value: Not Accepted) You can set a password of up to 31 characters so that only users that have When using a network service that requires a login name, email address, input can use AirPlay.

  • Page 84: Bluetooth

    Setup Setup 4. Bluetooth 4. Bluetooth ‰ Pairing Information (Default Value: -) Change the settings for the Bluetooth function. • Wait for a while if "4. Bluetooth" cannot be selected. It can be selected when You can initialize the pairing information stored on this unit. If you are no longer the Bluetooth function is activated.
  • Page 85 Setup Setup 4. Bluetooth ‰ Low Latency Mode (Default Value: Off) (Bluetooth Transmitter) ‰ Bluetooth Transmitter (Default Value: Off) If the audio from a device connected via Bluetooth is delayed compared to the video on the TV when watching a gaming screen, etc., you can reduce the audio Select whether or not to use the function that transmits audio from this unit to delay.

  • Page 86: Works With Sonos

    Setup Setup 5. Works with SONOS 5. Works with SONOS ‰ Output Zone (Default Value: Main) Change the settings to connect with the Sonos Port. Select the zone where you want to listen to the music. (SONOS-1/SONOS-2) ‰ Input Selector (Default Value: Off) •...

  • Page 87: Firmware Update

    Setup 6. Firmware Update 7. Lock ‰ Update Notice (Default Value: Enable) Lock the Setup menu so that the settings cannot be changed. ‰ Setup Parameter (Default Value: Unlocked) Availability of a firmware update is notified via network. Lock the Setup menu so that the settings cannot be changed. Enable Notify updates Locked...

  • Page 88: Factory Reset

    Setup 8. Factory Reset All the settings are restored to factory defaults. Select "Start" and press ENTER. • If "Factory Reset" is performed, your settings are restored to the default values. Be sure to note down your setting contents beforehand.

  • Page 89: Web Setup

    Setup Web Setup Menu operations You can make the settings for the network function of this unit using an Internet Device Information browser on a PC, smartphone, etc. You can change the Friendly Name or AirPlay Device Name, set an AirPlay Password, etc.

  • Page 90: Troubleshooting

    Troubleshooting Before starting the procedure When the unit is operating erratically Try restarting the unit Resetting the unit (this resets the unit settings to the default) Turning off Initial Setup which appears when you turn the power on Troubleshooting Troubleshooting „...

  • Page 91: Before Starting The Procedure

    Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device.

  • Page 92: When The Unit Is Operating Erratically

    Troubleshooting When the unit is operating erratically ‰ Try restarting the unit ‰ Resetting the unit (this resets the unit settings to the default) Restarting this unit may solve the problem. Set the main unit to standby, then after waiting for 5 seconds or more, press and hold the ON/STANDBY button If the restart of the unit does not solve the problem, reset the unit, and restore of the main unit for at least 5 seconds, and then restart the unit.

  • Page 93: Turning Off Initial Setup Which Appears When You Turn The Power On

    Troubleshooting Turning off Initial Setup which appears when you turn the power on If a Wi-Fi connection is not established, or if a wired LAN connection is not made, Initial Setup is displayed when you turn the power on. To stop Initial Setup from being displayed, press and hold the RETURN button for 5 or more seconds while it is being displayed.

  • Page 94: Troubleshooting

    Troubleshooting Troubleshooting „ Power ‰ The unit turns off unexpectedly ( →p80) • If "2. Control" - "Auto Standby" on the Setup menu is activated, the unit automatically enters the standby mode. • The protection circuit function may have operated due to an abnormal rise in temperature of the unit. In such a case, the power turns off repeatedly even if the power is turned on each time.

  • Page 95: X84; Video

    Troubleshooting ‰ Noise can be heard • Using cable ties to bundle analog audio cables, power cords, speaker cables, etc. may degrade the audio performance. Do not bundle the cords. • An audio cable may be picking up interference. Change the position of the cables. ‰...

  • Page 96: X84; Linked Operation

    Troubleshooting „ Linked operation ‰ HDMI linked operation does not work with CEC-compliant devices, such as a TV ( →p79) • In the Setup menu of the unit, set "2. Control" - "HDMI CEC" to "On". • It is also necessary to set HDMI linking on the CEC-compliant device. Check the instruction manual. „...
  • Page 97 Troubleshooting ‰ Cannot connect a Bluetooth wireless technology enabled device (PC, smartphone, etc.) to this unit • Initialize the pairing information and perform pairing again. Firstly delete all the pairing information saved on this unit. In the Setup menu, select "4. Bluetooth" - "Bluetooth Receiver" - "Pairing Information", then press ENTER while "Clear"...

  • Page 98: X84; Network Function

    Troubleshooting „ Network function • If you cannot select a network service, start up the network function to select it. It may take approx. one minute to start it up. • When the NET indicator is blinking, this unit is not properly connected to the home network. •...

  • Page 99: X84; Usb Storage Device

    Troubleshooting „ USB storage device ‰ USB storage device is not displayed ( →p66) • Check if the USB storage device or USB cable is securely inserted to the USB port of the unit. • Disconnect the USB storage device once from the unit, and then reconnect it. •...

  • Page 100: X84; Multi-Zone Function

    Troubleshooting „ Multi-zone function ‰ Cannot ZONE-output the audio of externally connected AV components • To output audio from an externally connected AV component to ZONE 2, use an analog audio cable for connection. Note that ZONE 2 output is not possible with the connection using an HDMI cable, digital coaxial cable, or digital optical cable.
  • Page 101 Appendix General Specifications Appendix...

  • Page 102: Adding Play Queue Information 71 General Specifications

    Appendix General Specifications Amplifier Section North American and Japanese models European, Middle East, Australian and Asian models (North American models) With 8 ohm loads, both channels driven, from 20Hz- 20kHz; rated 110 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output.
  • Page 103 Appendix 80 mW + 80 mW (32 Ω, 1 kHz, 10% THD) Headphone Rated Output 8 Ω - 600 Ω Supported impedance of Headphones Headphones Frequency Response 5 Hz - 100 kHz (Direct/Pure Audio) *Typical usage is 1/8th power (Sine wave) on 2ch channels into the rated load. Full power is expected to be used in extreme case for a while. Tuner Section North American models European models...
  • Page 104 Appendix HDMI North American and Japanese models European, Middle East, Australian and Asian models Input Output HDMI IN *1 HDMI OUT BD/DVD CBL/SAT GAME bandwidth 40Gbps 40Gbps 40Gbps 40Gbps 40Gbps ALLM Gaming-VRR SBTM Uncompressed 8K/60p 8K/60p 8K/60p 8K/60p 8K/60p 4:2:0 4:2:0 4:2:0 4:2:0...
  • Page 105 Appendix Corresponding Frame rate Color space Color depth HDMI Input input resolutions 24/25/30 Hz YCbCr4:2:2 12 bit (3840x2160p) YCbCr4:4:4/RGB 8 bit 10/12 bit 4K SMPTE 48/50/60 Hz YCbCr4:2:0 8 bit (4096x2160p) 10/12 bit YCbCr4:2:2 12 bit YCbCr4:4:4/RGB 8 bit 10/12 bit 100/120 Hz YCbCr4:2:0 8/10/12 bit...
  • Page 106 Appendix Network Section North American and Japanese models European, Middle East, Australian and Asian models Ethernet LAN 1 (10BASE-T/100BASE-TX) Wireless LAN IEEE 802.11 a/b/g/n/ac standard (Wi-Fi ® standard) 5 GHz/2.4 GHz band MP3 (.mp3) • MPEG-1/MPEG-2 Audio Layer-3/44.1 kHz, 48 kHz/Between 8 kbps and 320 kbps, and VBR/2 ch WMA (.wma) •...
  • Page 107 Appendix USB Section North American and Japanese models European, Middle East, Australian and Asian models 2 (Front: Ver.2.0, 5 V/0.5 A, Rear: Ver.2.0, 5 V/1A) MP3 (.mp3) • MPEG-1/MPEG-2 Audio Layer-3/44.1 kHz, 48 kHz/Between 8 kbps and 320 kbps, and VBR/2 ch WMA (.wma) •...
  • Page 108 Appendix General North American and Japanese models European, Middle East, Australian and Asian models (North American models) AC 120 V, 60 Hz Power Supply AC 220 - 240 V, 50/60 Hz (Japanese models) AC 100 V, 50/60 Hz (North American models) 265 W Power Consumption 275 W...
  • Page 109 Appendix Audio Inputs North American and Japanese models European, Middle East, Australian and Asian models Analog 4 (Including 1×PHONO) 3 (COAXIAL×1, OPTICAL×2) Digital • Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, and 24 bit.
  • Page 110 SN 29404148A_EN © Copyright 2024 Premium Audio Company Technology Center K.K. All rights reserved. ©2024 Premium Audio Company Technology Center K.K. Tous droits de reproduction et de traduction réservés. Privacy Policy, available at [https://www.onkyo.com/privacy/] O2404-1...

Table of Contents

Save PDF