Before You Begin; Hardware Installation - Ubiquiti AF-5G-OMT-S45 Quick Start Manual

Before You Begin

You'll need a driver for use with the
included Phillips Bit.
Note:
point detail to engage into the
painted screw recess. Japanese
Industrial Standard (JIS) type
screwdrivers with this profile are
available from online sources and
industrial suppliers.
Search for "JIS 1x75 screwdriver".
Select Tip No. 1.

Hardware Installation

To install the AF‑5G‑OMT‑S45, disassemble
the mounting hardware (refer to the
RocketDish Quick Start Guide if necessary)
to access the back of the antenna feed.
Once the back of the antenna feed is
accessible, perform the following steps:
The Phillips Bit has sharper