Table of Contents
Advertisement
w
q
e
q
q
e
q
q
w
r
w
r
Straight Stitch Needle Plate
The stitch patterns 01-08 (MODE 1) can be sewn with the
straight stitch needle plate.
MODE 1:
Replace the needle plate with the straight stitch needle
plate (refer to page 16).
"S" mark will appear at the end of the pattern number
when the straight stitch needle plate is attached.
q Straight stitch needle plate
w S mark
NOTE:
When the straight stitch needle plate is attached to
the machine, the patterns not suitable for the straight
stitch needle plate cannot be selected.
Lock-a-Matic Stitch
Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
Use this stitch to secure the beginning and the end of a
seam with backstitching. When you reach the end of the
seam, press the reverse button q once. The machine
will sew four reverse stitches, four forward stitches, and
then stop sewing automatically.
q Reverse button
Locking Stitch
Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
This unique stitch is used where an invisible locking
stitch is needed. Lower the needle close to the front edge
of the fabric.
The machine will sew several locking stitches in place
and continue sewing forward. When you press the
reverse button q at the end of the seam, the machine will
sew several locking stitches in place, then stop sewing
automatically.
q Reverse button
33
MODE 1: 02, 02S
AUTO
Zigzag foot A or
Upper feed foot AD
5
MODE 1: 03, 03S
AUTO
Zigzag foot A or
Upper feed foot AD
5
Advertisement
Table of Contents
