Table of Contents
Advertisement
q
e
q
e
w
r
q
w
r
Fagoting
Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
* Stitch patterns
(MODE 1)
used.
Use this stitch to join two pieces of fabric to create an
open work appearance and add design interest.
Fold under each fabric edge 1.5 cm (5/8˝) and press.
Pin the two edges to paper or tear away backing 0.5 cm
(3/16˝) apart.
q 0.5 cm (3/16˝)
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
After finishing sewing, tear away the paper.
Scallop
Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
* Stitch patterns
(MODE 1)
used.
Sew scallops 1 cm (3/8˝) from the fabric edge.
Trim the allowance close to the stitches.
Make sure not to cut the stitches.
64
MODE 1: 58
AUTO
Satin stitch foot F
5
(MODE 2) can also be
MODE 1: 66
AUTO
Zigzag foot A
5
(MODE 2) can also be
Advertisement
Table of Contents
