Patchwork Piecing; Patchwork - ELNA eXcellence 730 PRO Instruction Manual

q
e
q
w
w
q
q
e
w
r
q
w
q
e
w
r

Patchwork Piecing

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
NOTE:
Use 1/4˝ seam foot O for the stitch pattern 06, 07, 06S
and 07S in MODE 1.
Use Zigzag foot or Upper feed foot AD for stitch pattern
05 and 05S.
Select pattern 06 (MODE 1).
Place the patchwork pieces right sides together. Sew
while guiding the edge of the fabric along the guide on
the foot to keep a precise 1/4˝ seam allowance.
q Guide
w Right sides of the fabric
Angle scales on the needle plate
You can easily seam patchwork pieces at the desired
angle without marking, by using the angle scales on the
needle plate.
The angle scales are marked at 45, 60, 90 and 120
degrees.
Use the broken lines when piecing the patchwork pieces
with the 1/4˝ seam foot O as illustrated.
q Broken line
NOTE:
Use the solid lines when piecing the patchwork pieces
with the zigzag foot A. Align the edge of the fabric to
the 1/4˝ seam guide line.
w Solid line
e 1/4˝ seam guide line

Patchwork

Machine settings
q Pattern:
w Thread tension:
e Presser foot:
r Foot pressure:
* Stitch patterns
can also be used.
Open the seam flat with the right side up and sew
patchwork stitch along the seam line.
65
MODE 1: 05, 06, 07, 05S-07S
AUTO
1/4˝ seam foot O or
Zigzag foot A or
Upper feed foot AD
5
MODE 2: 08
AUTO
Satin stitch foot F
5
(MODE 1) (MODE 2)