Setting Button Functions (Key Prg); Traffic Information; Switching Traffic Information Priority On/Off - Bosch Dover USB40/80 Operating And Installation Instructions

42 | en
f Press the MENU 5 button repeatedly
until "HCUT" appears on the display, along
with the current setting of "OFF", 1 or 2
(strength of the interference level cut).
f Turn the volume controller 1 to the left
or right in order to adjust "HCUT" or to
turn it off.
f Press the MENU 5 button, repeatedly if
necessary, to close the menu.

Setting button functions (KEY PRG)

You can set the short press function of the
and 6 buttons in radio operation. The
following settings are available:
AUTOSEEK: Automatically search for the
f
next receivable station.
f MANSEEK: Manually alter the frequency in
steps.
PRSTSCAN: Sample the stations stored in
f
the current memory bank.
BANDSCAN: Sample receivable stations in
f
the current waveband.
f If necessary, first switch to FM radio
operation.
f Press the MENU 5 button to open the
menu.
f Press the MENU 5 button repeatedly
until "KEY PRG" appears in the display.
f Turn the volume controller 1 to the left
or right in order to change between the
settings.
f Press the MENU 5 button, repeatedly if
necessary, to close the menu.
7 620 000 120 - 123 | 10.2010
Radio operation | Traffic information

Traffic information

Switching traffic information prior-
ity on/off
To switch the priority for traffic information on
or off in any operating mode,
f Press the TA ; button.
Note:
This function is only available in the
USB and AUX operating modes if the
FM waveband was tuned to last.
The priority for traffic announcements is
activated if the display shows the TA symbol.
As soon as the device receives a traffic
announcement, it is switched through. The
display shows "TRAFFIC" for the duration of
the announcement.
Note:
You will hear a warning beep,
if you leave the reception area of
f
the selected traffic information
station while you are listening to
the traffic radio station or
another audio source, and the
automatic search which then
follows fails to find a new traffic
information station.
f if you retune the radio from a
traffic information station to a
station that does not broadcast
traffic information.
If you hear the warning beep, you can
either switch off traffic information
Robert Bosch Car Multimedia GmbH