Wall Mounting - Onkyo HTP-750 Instruction Manual

Getting to know Your Speaker Package—Continued

Wall Mounting

The speakers can easily be wall mounted by using the
keyhole slots. To prevent the speaker from vibrating
against the wall, attach four of the supplied spacers to the
keyhole fins on the rear of each speaker.
■ Mounting vertically
To mount the front speakers vertically, use the keyhole
slot shown to hang each speaker on a screw that's
securely screwed into the wall.
Keyhole slot for
vertical wall
mounting
■ Mounting horizontally
To mount the center speaker horizontally, use the two
keyhole slots shown to hang each speaker on two screws
that are securely screwed into the wall.
Keyhole slots for horizontal
wall mounting
Rubber spacers
8
Caution:
A mounting screw's ability to support a speaker depends
on how well it's anchored to the wall. If you have hollow
walls, screw each mounting screw into a stud. If there are
no studs, or the walls are solid, use suitable wall anchors.
Use screws with a head diameter of 3/8" (9 mm) or less
and a shank diameter of 1/8" (3.5 mm) or less. With hol-
low walls, use a cable/pipe detector to check for any
power cables or water pipes before making any holes.
Leave a gap of between 1/4" and 5/16" (6–8 mm)
between the wall and the base of the screw head, as
shown.
Rubber spacers
(We recommend that you consult a home installation
professional.)
Wall
1/4"–5/16"
(6–8 mm)
■ Using Rubber Spacers with the Speakers
We recommend using the supplied rubber spacers
to achieve the best possible sound from your
speakers. The rubber spacers prevent the speakers
from moving, providing a more stable setup.
Rubber spacers
Bottom of the
speaker