Connecting Onkyo U Components - Onkyo HT-S5300 Instruction Manual

Using the AUX INPUT jacks on the front panel
Note
• When you connect to both AUX INPUT AUDIO jacks and AUX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack
will be given a higher priority.
• The AV receiver can output audio and video signals from the AUX INPUT jacks to the VCR/DVR OUT jacks.

Connecting Onkyo u Components

Step 1:
Make sure that each Onkyo component is connected
with an analog audio cable (connection
examples) (➔ 17).
Step 2:
Make the u connection (see illustration below).
Step 3:
If you're using an RI Dock, or cassette tape deck,
change the Input Display
With u (Remote Interactive), you can use the following
special functions:
■
System On/Auto Power On
When you start playback on a component connected via
u, if the AV receiver is on Standby, it will automati-
cally turn on and select that component as the input
source.
■
Direct Change
When playback is started on a component connected via
u, the AV receiver automatically selects that compo-
nent as the input source.
■
Remote Control
You can use the AV receiver's remote controller to con-
trol your other u-capable Onkyo components, point-
ing the remote controller at the AV receiver's remote
control sensor instead of the component. You must enter
the appropriate remote control code first
En
18
Analog audio line
output (➔ 15)
Portable audio player
C in the hookup
(➔ 23).
(➔ 51).
Composite
video output
Camcorder, etc.
Note
• Use only u cables for u connections. u cables are supplied
with Onkyo players (DVD, CD, etc.).
• Some components have two u jacks. You can connect either
one to the AV receiver. The other jack is for connecting addi-
tional u-capable components.
• Connect only Onkyo components to u jacks. Connecting other
manufacturer's components may cause a malfunction.
• Some components may not support all u functions. Refer to
the manuals supplied with your other Onkyo components.
• While Zone 2 is on, the System On/Auto Power On and Direct
Change u functions do not work.
REMOTE
CONTROL
e.g., CD player
e.g., DVD player
Analog audio L/R
outputs
IN
L
R
TV/CD
IN
L
R
BD/DVD
R L
ANALOG
AUDIO OUT
R L
ANALOG
AUDIO OUT