Onkyo HT-S5300 Instruction Manual page 49

■
Charging Your iPod models Battery
The UP-A1 Dock charges your iPod models battery while
your iPod is in the UP-A1 Dock and connected to the
UNIVERSAL PORT jack on the AV receiver. While your
iPod is seated in the UP-A1 Dock, its battery will be
charged when the AV receiver is set to "On" or "Standby".
Note
• When UP-A1 Dock that seated iPod is connected, the power
consumption on standby mode slightly increases.
■
Status Messages
• PORT Reading
The AV receiver is checking the connection with the
dock.
• PORT Not Support
The AV receiver do not support the connected dock.
• PORT UP-A1
UP-A1 Dock is connected.
Note
• The AV receiver displays the message "
onds after recognizing the UP-A1.
• When the status message is not displayed on the AV receiver's
display, check the connection to your iPod.
RI Dock
RI Dock is sold separately.
For supported iPod models, see the instruction man-
ual of the RI Dock.
With the RI Dock, you can easily play the music stored on
your Apple iPod through the AV receiver and enjoy great
sound, and watch iPod slideshows and videos on your TV.
In addition, the onscreen display (OSD) allows you to
view, navigate, and select your iPod's contents on your
TV, and with the supplied remote controller, you can con-
trol your iPod from the comfort of your sofa. You can even
use the AV receiver's remote controller to operate your
iPod.
Note
• Enter the appropriate remote control code before using the AV
receiver's remote controller for the first time
• Connect the RI Dock to the AV receiver with an u cable
47).
(➔
• Set the RI Dock's RI MODE switch to "HDD" or "HDD/
DOCK".
• Set the AV receiver's Input Display to "DOCK"
■
System Function
System On
When you turn on the AV receiver, the RI Dock and iPod
turn on automatically. In addition, when the RI Dock and
iPod are on, the AV receiver can be turned on by pressing
ON/STANDBY.
Auto Power On
If you press the remote controller's 1 while the AV
receiver is on Standby, the AV receiver will automatically
turn on, select your iPod as the input source, and your
iPod will start playback.
Direct Change
If you start iPod playback while listening to another input
source, the AV receiver will automatically switch to the
input to which the RI Dock is connected.
Other Remote Controllers
You can use the remote controller that came with the AV
receiver to control other iPod functions. The available
functionality depends on the AV receiver.
iPod Alarm
If you use the Alarm function on your iPod to start play-
back, the AV receiver will turn on at the specified time and
select your iPod as the input source automatically.
• Linked operations do not work with video playback or when the
• If you use your iPod with any other accessories, iPod playback
• This function only works when the Standard mode is set to On.
UP-A1
" for several sec-
By pressing REMOTE MODE that's been programmed
with the remote control code for your Dock, you can con-
trol your iPod in the Dock with the following buttons.
See "Remote Control Codes for Onkyo Components Con-
nected via u" for details on entering a remote control
code
See the Dock's instruction manual for more information.
■
PORT is preprogrammed with the remote control code for
controlling a Dock with Universal Port connector.
You can control your iPod when "PORT" is selected as
the input source.
51).
(➔
Without the RI Control
You must enter a remote control code 82990 first
■
(➔ 23).
• Set the RI Dock's RI MODE switch to "HDD" or
• ON/STANDBY may not work with a remote control
With the RI Control
In this case, make an u connection and enter a remote
control code 81993 (with u).
• Set the AV receiver's Input Display to "DOCK"
Note
alarm is set to play a sound.
detection may not work.
■
Operating Notes
• Use the AV receiver's volume control to adjust the playback
volume.
• While your iPod is inserted in the RI Dock, its volume control
has no effect.
• If you do adjust the volume control on your iPod while it's
inserted in the RI Dock, be careful that it's not set too loud
before you reconnect your earphones.
Controlling Your iPod
(➔ 51).
UP-A1 Dock
RI Dock
"HDD/DOCK".
code (without u). In this case, make an u connection
and enter a remote control code 81993 (with u).
(➔ 51).
23).
(➔
En
49