Using The Parking Brake; Storing The Trailer - InStep QUICK N EZ User Manual

Using the Parking Brake Strap
Avoid injury. Always engage the parking brakes
when stopping, releasing the handle or loading or
unloading children.
Only use the parking brake strap while in the
Note:
stroller mode.
1.
Wrap the brake strap through the rear wheel
and around the back of the trailer frame.
Brake
strap
2.
Fasten the brake strap clip to the opposite end
of the brake strap.
Brake
strap clip
14
WARNING!

Storing the Trailer

WARNING!
There are pinch points between the sidewalls and
the frame of the trailer that may cause injury.
Always fold or unfold the trailer slowly and with
caution. Keep children clear when folding or
unfolding the trailer.
1.
Remove the flag and pole. Separate the flag
pole sections.
2.
Remove the rear wheels:
a. Find the release lever on the wheel bracket.
b. Pull the release lever straight out and hold.
c. Remove the wheel.
d. Release the lever.
3.
Remove the locking pin from the tow bar
bracket (located at the front corner of the
trailer).
4.
Fold the tow bar underneath the trailer.
5.
Place the locking pin back through the tow bar
and bracket.
6.
Place all loose items inside the passenger
compartment.
7.
Carefully fold the frame down.
8.
Store in a dry place.
Important!
If the storage area is hot then release
some air from the tires. This will help prevent
excessive expansion or popping.