Using The 5-Point Safety Harness; Using The 5-Point Safety Harness With Two Children; Adjusting The Shoulder Strap Height - InStep QUICK N EZ User Manual

Two seat bicycle trailer with stroller attachment
Table of Contents

Advertisement

Using the 5-Point Safety Harness

Using the 5-Point Safety Harness with Two Children

WARNING!
Avoid serious injury from falling or sliding out.
Always properly secure the passenger with the
5-Point Safety Harness.
It may be dangerous to leave your child unattend-
ed. Never leave your child unattended in or near
the bicycle trailer.
1.
Unbuckle the shoulder
straps from the center
lap buckle.
2.
Seat the child in
the center of the
passenger
compartment.
3.
Place the lap belt
buckle between the
child's legs.

Adjusting the Shoulder Strap Height

There are three slots on the back of the seat.
These slots are used to adjust the proper height of
the shoulder straps to your child's height. To adjust
the shoulder strap height:
1.
Starting from the back
of the seat, pull the
shoulder strap anchor
away form the seat.
2.
Insert the anchor through
the slit in the seat,
pushing it towards the
front.
4.
Place the shoulder straps over the child's
shoulders with the waist belt under the
child's arms. See Adjusting the Shoulder
Strap Height below for more detail.
5.
Important! Adjust the
shoulder straps and lap
buckle so they meet at the
child's stomach.
3.
Insert the anchor
through the slit in the
front of the seat at the
desired height.
4.
Pull the strap and anchor
all the way through to
the back. Make sure
the strap is properly
anchored on the seat
back. Repeat these
steps for the
opposite strap.
Clip the shoulder straps
into the lap belt buckle,
and adjust the shoulder
straps.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents