Table of Contents
Advertisement
Attach the Rear Wheels
WARNING!
Rear wheels that are not securely locked in place
may fall off the trailer and cause serious injury
or death. Always check the wheels are securely
locked in place before use.
1.
Insert the rear wheel axle into the rear wheel
bracket hole.
Wheel axle
Rear wheel
bracket
2.
Push the wheel into the bracket until you hear
the axle click into place.
Release lever
for rear wheels
Note: shown from underside of
the frame.
3.
Pull firmly on the wheel to ensure the locking
mechanism is engaged. Repeat these steps
on the opposite side.
Insert the Safety Flag
Important!
The safety flag is an important safety
feature that warns others a trailer is present and
on the bicycle. Always have the safety flag on the
trailer when in use.
1.
Assemble the flag pole
sections by sliding the top
half of the pole into the
opening of the bottom half
of the pole.
2.
Slide the pole through the
hole and into the sleeve
located near the rear corner.
Flag pole sleeve
Page 7
Hide quick links:
Advertisement
Table of Contents
