Attach The Bumper Guard; Attach The Canopy; Extend And Secure The Tow Bar - InStep QUICK N EZ User Manual

Attach the Bumper Guard

1.
Align the holes of the plastic bumper with the
holes on the top, right corner of the frame.
Be sure the wall frame fits into the inset of the
plastic bumper.
2.
Using a phillips
head screwdriver,
fasten the screws
through the holes
of the plastic
bumper and frame.
Plastic bumper inset
Right front
frame corner

Attach the Canopy

1.
Place the canopy over the canopy frame.
2.
Fasten the snaps on the front, back and top of
the canopy to the side walls (6 snaps total).
3.
Attach the hook and loop fasteners on the
canopy to the strips on the front and back
frame walls.
Snap
Hook
and loop
Snap
6
Screw
Wall frame
Screw
Unroll rain protector
from elastic (if needed)
Canopy
Snap
Hook
and loop

Extend and Secure the Tow Bar

Tow bar
Front frame
Locking
pin
Safety
loop
Locking
pin
1.
Place the trailer
on its side with the
tow bar on top.
2.
Remove the
locking pin from
the bracket.
3.
Rotate the tow bar
until it rests on the
front end of the
frame.
4.
Insert the locking
pin through both the
bracket and tow bar.
5.
Slide the metal
safety loop onto the
locking pin. Check
that it is securely
in place.