Attach The Parking Brake; Attach The Canopy; Extend And Secure The Tow Bar - InStep Rocket ACIS99ROCKTBLU User Manual

Attach the Canopy

1. Bring the front panel up and fasten the
buckles on each of the side walls.
2. Bring the back panel up and fasten the
buckles on each of the side walls. Pull the
straps on the side walls to tighten.
3. Attach the hook and loop fasteners on the
canopy to the strips on the front and back
frame walls.
4. Stretch the canopy over the trailer frame.
The bug screen should face towards the front
of the trailer.
5. Fasten the three snaps on the front, back and
top of the canopy to the side walls (six snaps
total).
Canopy
Snap
Hook
and loop
Snap
Fasten buckles to side wall
6

Extend and Secure the Tow Bar

Unroll weather shield
from elastic (if needed)
bug
screen
Hook
and loop
Snap
1. Pull the tow bar
locking latch down
and out of the bottom
latch slot.
Locking
latch in
down
Tow bar
position
2. Extend and Secure
the Tow Bar.
3. Rotate the tow bar
until it rests on the
front end of the frame.
4. The tow bar locking
latch should snap into
the top slot.
Check that the tow bar
5.
is securely locked into
place.
Locking
latch in up
position