Foreword; For Your Safety - Godox V860 Instruction Manual

Foreword

Thank you for purchasing this product.
This V860IIC camera flash applies to Canon EOS series cameras
and is compatible with E-TTL II autoflash. With this E-TTL II
compatible flash, your shooting will become simpler. You can easily
achieve a correct flash exposure even in complex light-changing
environments. This camera flash features:
●
GN60 (m ISO 100, @200mm). 22 steps from 1/1 to 1/128.
●
Pro 2000mAh Li-ion Battery-max.1.5s recycle-650 full power pops.
●
Fully support Canon E-TTL II camera flash. Workable as Master or
Slave unit in a wireless flash group.
●
Use dot-matrix LCD panel to make clear and convenient
operations.
●
With built-in 2.4GHz wireless remote system to support
transmitting and receiving.
●
Provided multiple functions, include HSS (up to 1/8000s), FEC,
FEB, etc.
●
Use optional FT-16S to adjust flash parameters & trigger the flash.
●
Stable consistency and color temperature with good even lighting.
●
Support with firmware upgrade.

For Your Safety

Always keep this product dry. Do not use in rain or in damp
conditions.
This product contains high-voltage electronic parts. Touching
the high-voltage circuit inside it may result in electric shock. Do
not disassemble. Should repairs become necessary, this
product must be sent to an authorized maintenance center.
Stop using this product if it breaks open due to extrusion, falling
or strong hit. Otherwise, electric shock may occur if you touch
the electronic parts inside it.
Do not fire the flash directly into the eyes (especially those of
babies) within short distances. Otherwise visual impairment
may occur. When taking pictures for babies, keep the flash unit
at least 1 meter (3.3 feet) away from them. Using bounce flash
to reduce light intensity is also recommended.
Do not use the flash unit in the presence of flammable gases,
chemicals and other similar materials. In certain circumstances,
these materials may be sensitive to the strong light emitting
from this flash unit and fire or electromagnetic interference may
result.
Do not leave or store the flash unit in places where the ambient
temperature reads over 50°C (e.g. in automobile). Otherwise
the electronic parts may be damaged.
- 32 -