Thermal Fuse Protection; For Best Performance - CleanMax CMPS-1T Operating Instructions Manual

Your CleanMax vacuum cleaner comes equipped with a Manual Reset Thermal Fuse Protector� This thermal
protector is designed to protect your vacuum cleaner from overheating due to a cutoff in airflow (i�e� clogged
hose, operating the vacuum without a bag)� Should this situation occur, the thermal fuse protector will safely shut
off your vacuum cleaner to avoid any potential damage�
To reset the thermal fuse
1� Unplug the vacuum cleaner�
2� Check for problem (over-filled bag, clog in hose, clogged filters, etc�)�
3� Correct problem�
4� Locate "tripped" fuse — the small red button located on the bottom of the back side of the main body
(roughly one inch to the right of the left wheel)�
5� Using a pointy object, push the reset button�
6� Plug vacuum cleaner in and begin using�
• Keep machine and all accessories clean and in good operating condition.
• Change vacuum bags and filters as recommended to maintain optimum cleaning efficiency.
• Always use genuine bags, filters and parts, as use of other products may result in poor cleaning or filtration
performance� CleanMax filtration products are designed for maximum performance�
• Have machine checked periodically by the retailer where you purchased your CleanMax vacuum�
• Store machine carefully in dry area.
• For optimum cleaning performance and safety, follow your owner's manual.
Register your CleanMax vacuum warranty online at www.cleanmaxvacuums.com

Thermal Fuse Protection

For Best Performance

15