Adjusting the Handle Height
You may raise or lower the upper handle to a position
comfortable for you.
Rotate the handle lock, move the handle to 1 of 3 positions,
and lock the handle into position
Starting the Engine
1. Pull the blade-control bar to the handle
2. Turn the ignition key
handle
(Figure
17).
Note: When you pull the recoil-start handle, pull it
lightly until you feel resistance, then pull it sharply
(Figure
17). Allow the rope to return to the handle
slowly.
(Figure
14).
Figure 14
(Figure
Figure 15
(Figure
16) or pull the recoil-start
Note: If the machine does not start after several attempts,
contact an Authorized Service Dealer.
Using the Self-Propel Drive
To operate the self-propel drive, simply walk with your hands
on the upper handle and your elbows at your sides, and the
15).
machine will automatically keep pace with you
11
Figure 16
Figure 17
(Figure
Figure 18
18).