Sound Pressure Level; Sound Power Level; Vibration Level; Safety And Instructional Decals - Toro 30410 Operator's Manual

Traction unit
Hide thumbs Also See for 30410:
Table of Contents

Advertisement

• Never store the machine or fuel container inside
where there is an open flame, such as near a water
heater or furnace.
• Keep nuts and bolts tight, especially the blade
attachment bolts. Keep equipment in good
condition.
• Make sure all hydraulic line connectors are tight and
all hydraulic hoses and lines are in good condition
before applying pressure to the system.
• Keep your body and hands away from pin hole
leaks or nozzles that eject hydraulic fluid under high
pressure. Use paper or cardboard, not your hands,
to search for leaks. Hydraulic fluid escaping under
pressure can have sufficient force to penetrate the
skin and cause serious injury. If fluid is injected into
the skin it must be surgically removed within a few
hours by a doctor familiar with this form of injury
or gangrene may result.
• If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and any parts of the body away from the cutting
units, attachments, and any moving parts. Keep
everyone away.
• Check brake operation frequently. Adjust and service
as required.
• Battery acid is poisonous and can cause burns. Avoid
contact with skin, eyes, and clothing. Protect your
face, eyes, and clothing when working with a battery.
• Battery gases can explode. Keep cigarettes, sparks,
and flames away from the battery.
• The engine must be shut off before checking the oil
or adding oil to the crankcase.
• If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
• To make sure of optimum performance and
continued safety certification of the machine, use

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of
potential danger. Replace any decal that is damaged or lost.
1. Cutting/dismemberment hazard; fan—stay away from
moving parts.
93-7272
only genuine Toro replacement parts and accessories.
Replacement parts and accessories made by other
manufacturers could be dangerous, and such use
could void the product warranty.

Sound Pressure Level

This unit has an equivalent continuous A-weighted
sound pressure level at the operator ear of 89 dBA,
based on measurements of identical machines per ISO
11201 and EN 836.

Sound Power Level

This unit has an equivalent continuous A-weighted
sound power level at the operator ear of 105 dBA/1 pW,
based on measurements of identical machines per EN
11094.

Vibration Level

Hand-Arm
This unit has an equivalent continuous A-weighted
hand/arm vibration level of 2.5 m/s
measurements of identical machines per EN 1033 and
EN836.
Whole Body
This unit has an equivalent continuous A-weighted
hand/arm vibration level of 0.5 m/s
measurements of identical machines per EN 1032 and
EN 836.
7
2
, based on
2
, based on

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Groundsmaster 4000-d30410te

Table of Contents