Maintenance; Recommended Maintenance Schedule - Toro 30340 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
Each Use
After first 8 Hours
8 Hours
25 Hours
40 Hours
50 Hours
100 Hours
After first 200 Hours
200 Hours
At storage or 400 Hours
1
More often in dusty, dirty conditions.
Important Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
Engine Oil—check level
Safety System—check
Brake—check
Engine—clean outside
Mower Housing—clean
Engine Oil—change
Hydraulic Oil—check
Cutting Blades—check
Mower Housing—clean
Caster Wheels—grease
Foam Air Cleaner—service
PTO Belt Idler Arm—grease
Tires—check pressure
Hydraulic Oil—check
Belts—check for wear/cracks
Paper Air Cleaner—clean
1
Engine Oil—change
Spark Plug(s)—check
Electric Clutch—adjust
Engine—clean outside
Hydraulic Lines—check
Hydraulic oil filter—change
Oil Filter—change (200 hours or every other oil change)
Fuel Filter—replace
Paper Air Cleaner—replace
Hydraulic oil filter—change
Chipped Surfaces—paint
Perform all maintenance procedures listed above before storage
25
1
1
1